 Technical Support | |
| Home Products Events Support | |
Technical Support
Support Resources
- Support Knowledgebase
- Product Manuals
- Application Notes
- File Download Area
- Product Updates
- Discussion Forum
- Books
Product Information
EPM900: IAP, ISP SUPPORT FOR EPM900
Information in this article applies to:
- EPM900 all versions
QUESTION
Does the EPM900 support IAP and ISP applications?
ANSWER
The IAP and ISP functions are not supported on the bond out chip for the EPM900. The reason for this is that the emulator's start-up code resides in the Flash and the user code is emulated out of external RAM. If the IAP functions were available in the bond-out then the customer could potentially rewrite or erase parts of the emulator start-up code, making the EPM900 non-functional.
You may verify IAP functionality by flashing the program to an LPC932 and using the Keil monitor to debug the code.
MORE INFORMATION
- Refer to Supported Devices in the EPM900 User's Guide.
SEE ALSO
- EPM900: EMULATION AND PROGRAMMING ADAPTERS
- EPM900: SUPPORT IN FULL 8051 TOOLS
- EPM900: TIMEOUT ERRORS WHEN STARTING DEBUG MODE
- EPM900: SINGLE STEPPING ON LJMP INSTRUCTION AT 18MHZ
FORUM THREADS
The following Discussion Forum threads may provide information related to this topic.
Last Reviewed: Thursday, November 30, 2006