Keil Logo Arm Logo

RL-ARM HTTP Demo for MCBSTM32C

NOTE: THIS EXAMPLE WILL NOT RE-COMPILE WITHOUT RL-ARM INSTALLED!

This is a Real-Time Library (RL-ARM) TCPnet HTTP Server example prebuild for Keil MCBSTM32C Evaluation Board. It shows how to use the Web Server CGI interface.

This example configures the LAN network parameters for the evaluation board automatically if a DHCP Server is available in your LAN.

To use this example:

  • Connect ULINK to the Keil MCBSTM32C Evaluation Board and power the board up
  • In uVision - load the project file and execute Flash - Download
  • Connect the MCBSTM32C Board to a LAN with DHCP server (most LANs have this)
  • Connect your computer to the same LAN
  • Open your web browser and enter the address http://mcbstm32c/

This opens the demo page running on the MCBSTM32C Board. Enter:

User name: admin
Password: leave blank

The WEB pages shown are included into the project under HTTP Files group.

The HTTP_demo example is available for several targets:

  • MCBSTM32C: Stand-alone (no RTX Kernel) application
  • MCBSTM32C Debug: Stand-alone (no RTX Kernel) with debug output
  • MCBSTM32C RTX: Configured for RTX Kernel

This pre-compiled version is for target MCBSTM32C and may be downloaded using a evalution version of the RealView MDK-ARM package. Note that MDK-ARM Version 3.70 or later is required.

MCBSTM32C_HTTP_DEMO.ZIP (149K)
Sunday, July 05, 2009

Estimated File Download Time:
< 39 Seconds: 56Kb Modem
< 17 Seconds: 128Kb ISDN
< 10 Seconds: T1/Broadband

Keil logo

Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings