Keil Logo Arm Logo

STMicroelectronics STM32F401CC

The STMicroelectronics STM32F401CC is a Core - ARM 32-bit Cortex-M4 CPU with FPU - Adaptive real-time accelerator (ART Accelerator) - 84 MHz maximum frequency, 105 DMIPS/1.25 DMIPS/MHz - Memory protection unit - DSP instructions Memories - Up to 256 Kbytes of Flash memory - Up to 64 Kbytes of SRAM Clock, reset and supply management - 1.7 V (PDR OFF) or 1.8 V (PDR ON) to 3.6 V application supply and I/Os - POR, PDR, PVD and BOR - 4 to 26 MHz crystal oscillator - Internal 16 MHz factory-trimmed RC - 32 kHz oscillator for RTC with calibration - Internal 32 kHz RC with calibration 1x12-bit, 2.4 MSPS A/D converter: up to 16 channels General-purpose DMA - 16-stream DMA controllers with FIFOs and burst support Up to 10 timers - up to six 16-bit - two 32-bit timers up to 84 MHz - two watchdog timers (independent and window) Debug mode - Serial wire debug (SWD) & JTAG - Cortex-M4 Embedded Trace Macrocell Up to 81 I/O ports with interrupt capability - All IO ports 5 V tolerant - Up to 78 fast I/Os up to 42 MHz Up to 11 communication interfaces - Up to 3 x I2C interfaces - Up to 3 USARTs (2 x 10.5 Mbit/s, 1 x 5.25 Mbit/s), ISO 7816, LIN, IrDA, modem control) - Up to 4 SPIs (up to 42 Mbits/s at fCPU = 84 MHz) - SDIO interface Advanced connectivity - USB 2.0 full-speed device/host/OTG controller with on-chip PHY CRC calculation unit 96-bit unique ID RTC: subsecond accuracy, hardware calendar.

[Distributors]

Evaluation Boards
Data Sheets
Datasheet
2,055,766 bytes
Generic User Guide
1,755,988 bytes
Reference Manual
21,509,404 bytes
Technical Reference Manual
935,507 bytes

Get Adobe Acrobat Reader

Header Files
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

Keil logo

Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings