Keil Logo

Nuvoton NANO100SD3BN

The Nuvoton NANO100SD3BN is a Core - ARM Cortex-M0 core running up to 42 MHz - Supports Low Power Sleep mode - NVIC for 32 interrupt inputs, with 4-levels priority - Serial Wire Debug Flash EPROM Memory - 64K/32K/123K bytes application program memory (APROM) - 4 KB in system programming (ISP) loader program memory (LDROM) - Programmable data flash start address and memory size - ISP/IAP to update on-chip Flash EPROM SRAM Memory - 16K/8K bytes embedded SRAM DMA - 8 channels CRC - 3 common polynomials CRC-CCITT (CRC-8, CRC-16, CRC-32) Clock Control - Built-in 12 MHz OSC - Low power 10 kHz OSC for watchdog and low power system operation - PLL, up to 120 MHz, for high performance system operation and USB application (48 MHz) - External 4~24 MHz crystal input - External 32.768 kHz crystal input GPIO - 3 I/O modes (Push-Pull output, Open-Drain output, Input only with high impendence) Timer - 4 sets of 32-bit timers Watchdog Timer Window Watchdog Timer(WWDT) RTC - RTC counter (second, minute, hour), calendar counter (day, month, year) - 80 bytes spare registers PWM/Capture - 2 PWM modules, each has 2 16-bit PWM generators UART - Up to 2 16-byte FIFO UART controllers - IrDA (SIR), LIN, RS-485 9 bit mode SPI - Up to 3 sets of SPI controller - Master up to 32 MHz, Slave up to 16 MHz I2C - Up to 2 sets of I2C device - Master/Slave up to 1 Mbit/s I2S - Interface with external audio CODEC - Capable of handling 8, 16, 24, 32 bit word sizes ADC - 12-bit SAR ADC up to 2Msps conversion rate DAC - 12-bit monotonic output with 400K conversion rate Touch Key(TK) - up to 16 touch-keys scanning SmartCard (SC) - up to 3 ISO-7816-3 ports EBI (External bus interface) support - 64 KB in 8-bit mode or 128 KB in 16-bit mode - 8bit/16bit data width - byte write in 16-bit Data Width mode One built-in temperature sensor 96-bit unique ID 128-bit unique customer ID Brown-out - Built-in 2.5V/2.0V/1.7V BOD.

[Chip Vendor] [Distributors]

Development Tools
Compiler, Assembler, Linker, Debugger
JTAG Debuggers
Data Sheets
Generic User Guide
953,546 bytes
Reference Manual
12,180,061 bytes
Technical Reference Manual
472,236 bytes

Get Adobe Acrobat Reader

Header Files
FLASH Utilities
Real-Time OS
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.