Keil Logo

STMicroelectronics STM32F302RC

The STMicroelectronics STM32F302RC is a Core - ARM 32-bit Cortex-M4 CPU with FPU - single-cycle multiplication and HW division - DSP instruction and MPU - 72 MHz maximum frequency Memories - 128 to 256 Kbyte of Flash memory - Up to 40 Kbytes of SRAM CRC calculation unit Reset and power management - VDD, VDDA voltage range: 2.0 to 3.6 V - Power-on/Power down reset (POR/PDR) - Programmable voltage detector (PVD) - Low-power: Sleep, Stop, and Standby - VBAT supply for RTC and backup registers Clock management - 4 to 32 MHz crystal oscillator - 32 kHz oscillator for RTC with calibration - Internal 8 MHz RC with x 16 PLL option - Internal 40 kHz oscillator Up to 87 fast I/O ports - all mappable on external interrupt vectors - several 5 V-tolerant 12-channel DMA controller supporting timers, ADCs, SPIs, I2Cs, USARTs and DAC 2 x ADC 0.20 us (up to 39 channels) with selectable resolution of 12/10/8/6 bits 1 x 12-bit DAC channel with analog supply from 2.4 to 3.6 V 4 fast rail-to-rail analog comparators 2 x operational amplifier that can be used in PGA mode Up to 24 capacitive sensing channels Up to 11 timers - 1 32-bit timer and 2 16-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature encoder input - 1 16-bit 6-channel advanced-control timer, with up to 6 PWM channels - 1 16-bit timer with 2 IC/OCs, 1 OCN/PWM, deadtime gen., emergency stop - 2 16-bit timers with IC/OC/OCN/PWM, deadtime gen., emergency stop - 2 watchdog timers - SysTick timer: 24-bit downcounter - 1 16-bit basic timer to drive the DAC Calendar RTC with alarm, periodic wakeup from Stop/Standby Communication interfaces - CAN interface (2.0B Active) - 2 I2C Fast mode plus (1 Mbit/s) - Up to 5 USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control) - Up to 3 SPIs, 2 with multiplexed half/full duplex I2S interface - USB 2.0 full speed interface - Infrared transmitter Serial wire debug, Cortex-M4 with FPU ETM, JTAG 96-bit unique ID.

[Distributors]

Development Tools
Compiler, Assembler, Linker, Debugger
JTAG Debuggers
Data Sheets
Datasheet
1,772,283 bytes
Generic User Guide
1,755,988 bytes
Reference Manual
13,140,101 bytes
Technical Reference Manual
935,507 bytes

Get Adobe Acrobat Reader

Header Files
FLASH Utilities
Real-Time OS
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.