Device Database®

Cypress CY8C3446PVI-102

The Cypress CY8C3446PVI-102 is a Single Core 8051 MCU, up to 50 MHz, Dual Datapointer, 64KByte Flash Rom, 8KByte SRAM, 4 Flash protection levels, 2KByte DATA EEPROM, 8KByte ECC-Flash, Interrupt system with 27 sources and 8 priority levels, 1 Peripheral Hub Unit (PHUB) with 8 parallel access paths (spokes), 24 (Universal Digital Blocks) UDBs, 1 Configurable ADC Unit with up to 12 Bit resolution and 192ksps, 2 DAC Units, 4 Comparators, 1 CapSense Unit, 2 configurable multifunction Analog Blocks, 2 configurable general purpose OpAmps, 1 CAN 2.0b Interface, DMA with 24 channels, 4 16-Bit Timer, Real Time Clock, LCD driver system, 8 GPIO driver modes, 4 power down modes, 4-SIOs (special input/outputs), 29-Total I/Os, 25-GPIOs, On-Chip debug unit with JTAG/SWD/SWV interface, 4KByte instruction trace buffer, and On-Chip Oscillator.

[Chip Vendor] [Distributors]

Development Tools
Compiler, Assembler, Linker, Debugger
Data Sheets
Data Sheet
4,296,935 bytes

Get Adobe Acrobat Reader

Header Files
Emulators
FLASH Utilities
Device Programmers
Real-Time OS
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available at this time.

The following on-chip peripherals are simulated by the Keil Software µVision Debugger.

AGSI Drivers

The following AGSI Drivers are available for the Keil Software µVision Simulator.

AGDI Drivers

The following AGDI Drivers are available for the Keil Software µVision Debugger.