Keil Logo Arm Logo

Spansion MB9BF406R

The Spansion MB9BF406R is a 32-bit ARM Cortex-M3 Core - Up to 80MHz Frequency Operation - Memory Protection Unit (MPU) - Nested Vectored Interrupt Controller (NVIC) - 24-bit System timer (SysTick) On-chip Memories - Up to 512 Kbyte Flash - Up to 32 Kbyte SRAM for high-performance CPU - Up to 32 Kbyte SRAM for CPU/DMA Controller External Bus Interface - Supports SRAM, NOR& NAND Flash device - Up to 8 chip selects - 8/16-bit Data width - Up to 25-bit Address bit CAN Interface (Max. 2channels) - Compatible with CAN Specification 2.0A/B - Max. transfer rate: 1 Mbps - Built-in 32 message buffer Multi-function Serial Interface (Max. 8channels) - UART, CSIO, LIN, I2C DMA Controller (8channels) A/D Converter (Max. 16channels) - 12-bit A/D Converter Base Timer (Max. 8channels) - Operation mode: 16-bit PWM, 16-bit PPG, 16/32-bit reload, 16/32-bit PWC General Purpose I/O Port - Up to 100 fast I/O Ports Multi-function Timer (Max. 2unit) Quadrature Position/Revolution Counter (QPRC) (Max. 2unit) Dual Timer (Two 32/16bit Down Counter) Watch Counter Ext. Interrupt Controller Unit - Up to 16 external vectors - Include non-maskable interrupt (NMI) Watchdog Timer (2channels) - Hardware watchdog timer - Software watchdog timer CRC (Cyclic Redundancy Check) Accelerator Clock and Reset - 5 clock sources (2 ext. osc, 2 CR osc, and PLL) - Reset sources: INITX Pins, POR, SW, Watchdog, LVD, CSV Clock Super Visor (CSV) - Ext. OSC clock failure (clock stop) detect - Ext. OSC frequency anomaly detect Low Voltage Detector (LVD) - LVD1: error reporting via interrupt - LVD2: auto-reset operation Low Power Mode - Three power saving modes (SLEEP, TIMER, STOP) Debug - Serial Wire JTAG Debug Port (SWJ-DP) - Embedded Trace Macrocells (ETM) - Trace Port Interface Unit (TPIU).

[Chip Vendor] [Distributors]

Development Tools
Compiler, Assembler, Linker, Debugger
Evaluation Boards
JTAG Debuggers
Data Sheets
Data Sheet
978,374 bytes
Generic User Guide
1,364,135 bytes
Technical Reference Manual
1,106,603 bytes

Get Adobe Acrobat Reader

Header Files
FLASH Utilities
Device Programmers
Real-Time OS
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

Keil logo

Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

ARM’s Privacy Policy has been updated. By continuing to use our site, you consent to ARM’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.