Keil Logo

Toshiba TMPM366FDFG

The Toshiba TMPM366FDFG is an ARM Cortex-M3 microprocessor core Maximum operating frequency: 48 MHz On Chip program memory and data memory Internal FlashROM : 512 Kb Internal SRAM : 64 Kbyte Memory controller Up to 16Mbytes access area (Program / Data) External data bus (Separate / Multiplex): 8/16bit bus width Chip select controller: 2 channels DMA controller: 4 channels Transfer can support on chip Memory / Peripheral I/O / External memory 16-bit timer: 10 channels 16-bit interval timer mode 16-bit event counter mode 16-bit PPG output Input capture function Watchdog timer (WDT): 1 channel Watchdog timer reset UART : 1 channel Supports Full UART / supports IrDA1.0 mode General-purpose serial interface (SIO/UART): 2 channels Either UART mode or synchronous mode can be selected (4byte FIFO equipped: 2ch) Serial bus interface (I2C/SIO): 2 channels Either I2C bus mode or synchronous mode can be selected. Synchronous Serial interface (SSP): 3 channel Communication protocol that includes SPI: 3 types (SPI/SSI/Microwire) Baud rate: Master mode: 12Mbps (max.), Slave mode: 4.0Mbps (max.) USB Device controller : 1channel Compliance USB Specification Rev.2.0. Supports FS (12Mbps) (dose not support LS). 12-bit AD converter (ADC): 12channels Start up with 16-bit timer / Start up with an external trigger input Fixed channel / Channel scan mode Single / repeat mode AD monitog 2ch Conversion speed 1usec. (fsys = 40MHz) Interrupt source Internal : 50 factors...The order of precedence can be set over 7 levels External : 10 factors...The order of precedence can be set over 7 levels. Non-maskable interrupt (NMI) Input/ output ports (PORT): 74 pins Standby modes: IDLE, STOP1, STOP2 Clock generator (CG) On-chip PLL (8× / 6× ) Clock gear function: The high-speed clock can be divided into 1/1, 1/2, 1/4 or 1/8. Debug interface JTAG / SWD / SWV / TRACE (DATA 4bit).

[Chip Vendor] [Distributors]

Development Tools
Compiler, Assembler, Linker, Debugger
JTAG Debuggers
Data Sheets
Generic User Guide
1,364,135 bytes
Technical Reference Manual
1,106,603 bytes

Get Adobe Acrobat Reader

Header Files
FLASH Utilities
Real-Time OS
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.