Keil Logo

Atmel AT89LP6440

The Atmel AT89LP6440 is an 8051-based single-cycle microcontroller with 20 MIPS, 64KBytes ISP Flash ROM, 256 Bytes RAM, 4KBytes XRAM, 8KByte Flash Data Memory, Dual Datapointer, One 16x16 Multiply-Accumulate Unit, Interrupt system with 4 Priorities and 8 sources, One 10-Bit ADC Unit with 8 channels, One 16-Bit Capture /Compare/PWM Unit with 4 channels, 38 I/O Pins, Three 16-bit Enhanced Timer/Counters, Enhanced UART with automatic address recognition and framing error detection, Two 8-bit PWM Outputs, Enhanced Master/Slave SPI interface, 2 Analog comparator, One programmable Watchdog Timer with software reset, Brown-out Detection and Power-on Reset, and Two-wire On-chip Debug Interface.

[Chip Vendor] [Distributors]

Development Tools
Compiler, Assembler, Linker, Debugger
Data Sheets
Data Sheet
6,016,425 bytes
Instruction Set Manual for the Atmel AT89LP6440
Instruction Set Manual
178,311 bytes
White Paper
217,709 bytes

Get Adobe Acrobat Reader

Header Files
Emulators
Device Programmers
Real-Time OS
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

The following on-chip peripherals are simulated by the Keil Software µVision Debugger.

AGSI Drivers

The following AGSI Drivers are available for the Keil Software µVision Simulator.

AGDI Drivers

The following AGDI Drivers are available for the Keil Software µVision Debugger.


  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.