Keil Logo Arm Logo

Freescale Semiconductor MK10N512VMD100

The Freescale Semiconductor MK10N512VMD100 is a Core features - 32-bit ARM Cortex-M4 core (up to 150MHz CPU Clock) - DSP Support, MPU - Nested vectored interrupt contr. (NVIC) - Async. wake-up interrupt contr. (AWIC) - Debug & trace capability - 2-pin serial wire debug (SWD) - IEEE 1149.1 Joint Test Action Group (JTAG) - IEEE 1149.7 compact JTAG (cJTAG) - Trace port interface unit (TPIU) - Flash patch and breakpoint (FPB) - Data watchpoint and trace (DWT) - Instrumentation trace macrocell (ITM) System and power management - SW/HW watchdog with external monitor pin - DMA contr. with 16 channels - Low-leakage wake-up unit (LLWU) - Power management contr. with 10 different power modes - Non-maskable interrupt (NMI) - 128-bit unique identification (ID) number per chip Clocks - Multi-purpose clock generator - PLL and FLL operation - Internal reference clocks (32kHz or 2MHz) - 12MHz to 32MHz crystal osc. - 32kHz to 40kHz crystal osc. - Internal 1kHz low power osc. - DC to 50MHz external square wave input clock Memories and Memory Interfaces - FlexMemory (FlexNVM or FlexRAM) - up to 512 Flash - up to 128KB SRAM - Flash security and protection features - Serial flash programming interface (EzPort) Security and integrity - Cyclic redundancy check (CRC) Analog - 16-bit SAR ADC - Programmable voltage reference (VREF) - High-speed Analog comparator (CMP) with 6-bit DAC Timers - 1x8ch motor control/general purpose/PWM flexible timer (FTM) - 1x2ch quadrature decoder/general purpose/PWM flexible timer (FTM) - Carrier modulator timer (CMT) - Programmable delay block (PDB) - 1x4ch programmable interrupt timer (PIT) - Low-power timer (LPT) Communications - SPI - CAN - I2C with SMBUS support - UART (w/ ISO7816, IrDA and HW flow control) Human-machine interface - up to 104 GPIO (pin interrupt support, DMA request capability) - Capacitive touch sensing inputs.

[Distributors]

Data Sheets
Data Sheet
1,498,091 bytes
Generic User Guide
1,755,988 bytes
Technical Reference Manual
935,507 bytes

Get Adobe Acrobat Reader

Header Files
MDK Middleware
The following middleware components are pre-configured in MDK-Professional
Simulated Features
NOTE
Simulation for this device is provided by the default peripheral simulation driver.

Complete peripheral simulation is not available and is not planned to be implemented by ARM.

Keil logo

Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings