Infineon XC836T-2F

The Infineon XC836T-2F is an 8051 compatible microcontroller with dual DPTR, 8 KByte on-chip Program Flash ROM, 256 byte on-chip RAM, 256 byte on-chip XRAM, 8 KByte Boot ROM, 64 Byte User Configuration sector, High-Speed Synchronous Serial Interface (SSC), CORDIC Coprocessor, 3 Timers/Counters, 1 UART, Watchdog (WDT) 8 channel 10-bit A/D Converter (ADC), 1 Capture & Compare Unit 6 (CCU6), 1 Inter-IC Bus (IIC), Realtime Clock (RTC), 48MHz On-Chip Oscillator, 14 interrupts / 4 priority levels, On-Chip Debug Support Unit (OCDS), Device Access Port (DAP) & Single Pin DAP module (SPD), Brownout detection.

Development Tools Compiler, Assembler, Linker, Debugger CA51 Compiler Kit Keil PK51 Professional Developer's Kit Keil Data Sheets XC800 Instruction Set Manual 1,506,317 bytes Header Files XC836.H 31,525 bytes Emulators iC1000 PowerEmulator iSystem MetaICE-XF 8051 In-Circuit Emulator Metalink Corporation ADM-51 Signum Systems USP-51 Signum Systems JTAG Debuggers ULINK2 Keil FLASH Utilities WinBurn Microware Technology

Real-Time OS RTX51 Tiny Keil Simulated Features NOTE Simulation for this device is provided by the default peripheral simulation driver. Complete peripheral simulation is not available at this time. AGSI Drivers The following AGSI Drivers are available for the Keil Software µVision Simulator. Proteus VSM Labcenter Electronics 8051 State Machine MEBA I²C Simulation MEBA LCD Simulation (HD44780 Controller) MEBA LED simulation MEBA Signal Generator MEBA AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. Keil ISD51 Driver Keil Keil MON51/FlashMON Driver Keil