NXP (founded by Philips) P89LPC9361

The NXP (founded by Philips) P89LPC9361 is an 8051-based microcontroller with 2 clock highspeed core, 16K Bytes ISP/IAP Flash, 512 Bytes Data EEPROM, 256 Bytes RAM, 512 Bytes AUX RAM, Dual DPTR, 23(26) I/O Lines, 2 Timers/Counters, UART, I2C, SPI, 2 Analog Comparators, 2 ADCs, 2 Programmable Gain Amplifier, Capture & Compare (CCU) with 2 channels, 8 Key Pad Interrupts, Watchdog (WDT), Brownout detection, Realtime Clock (RTC), and On-Chip Oscillator.

Development Tools Compiler, Assembler, Linker, Debugger CA51 Compiler Kit Keil PK51 Professional Developer's Kit Keil Data Sheets 80C51 Family Programmer's Guide 185,335 bytes Data Sheet 425,803 bytes Errata Sheet 45,245 bytes User's Manual 986,508 bytes Header Files REG9351.H 6,314 bytes Emulators iC1000 PowerEmulator iSystem MetaICE-XF 8051 In-Circuit Emulator Metalink Corporation ADM-51 Signum Systems USP-51 Signum Systems FLASH Utilities WinBurn Microware Technology Device Programmers Dataman 448Pro2 Super Fast Gang ISP Production Programmer Dataman Programmers Ltd. Dataman 48Pro2 Super Fast Universal ISP Programmer Dataman Programmers Ltd. Dataman 848Pro2 Super Fast Stand-Alone Programmer Dataman Programmers Ltd.

Real-Time OS RTX51 Tiny Keil Simulated Features NOTE Simulation for this device is provided by the default peripheral simulation driver. Complete peripheral simulation is not available at this time. The following on-chip peripherals are simulated by the Keil Software µVision Debugger. Analog Comparator Brownout Detection CPU Clock Output I²C Interface Interrupts 12S/4L (Including External) Keyboard Interrupt Oscillator Control Port 0 (Quasi-bidirectional, Push-Pull, Input Only, Open Drain) Port 1 (Quasi-bidirectional, Push-Pull, Input Only, Open Drain) Port 2 (Quasi-bidirectional, Push-Pull, Input Only, Open Drain, 2-bits) Power Saving Modes (Idle and Power Down) Power-On Detection Serial UART (Enhanced Interface) Software Reset (SRST Bit) System Configuration Byte UCFG1 Timer 0 (Standard Timer + Pin Toggle) Timer 1 (Standard Timer + Pin Toggle) Watchdog Timer AGSI Drivers The following AGSI Drivers are available for the Keil Software µVision Simulator. Proteus VSM Labcenter Electronics 8051 State Machine MEBA I²C Simulation MEBA LCD Simulation (HD44780 Controller) MEBA LED simulation MEBA Signal Generator MEBA AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. Keil ISD51 Driver Keil Keil MON51/FlashMON Driver Keil