NXP (founded by Philips) LPC2109

The NXP (founded by Philips) LPC2109 is an ARM7TDMI-S based high-performance 32-bit RISC Microcontroller with Thumb extensions 64KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP) 8KB RAM, Vectored Interrupt Controller, Two UARTs, I2C serial interface, 2 SPI serial interfaces, Two timers (7 capture/compare channels), PWM unit with up to 6 PWM outputs, 4-channels 10bit ADC, 1 CAN channel. Real Time Clock, Watchdog Timer, General purpose I/O pins. CPU clock up to 60 MHz, On-chip crystal oscillator and On-chip PLL.

Development Tools Compiler, Assembler, Linker, Debugger MDK-ARM (Microcontroller Development Kit) Keil MDK-Lite Download Keil Data Sheets User Manual 1,685,967 bytes Header Files LPC21XX.H 21,925 bytes JTAG Debuggers ULINK-ME Keil ULINK2 Keil ULINKPro Keil J-Link ARM SEGGER Microcontroller FLASH Utilities FLASHit hse Electronic ULINK2 Keil Device Programmers Dataman 48Pro+ Universal ISP Programmer Dataman Programmers Ltd.

MDK Middleware The following middleware components are pre-configured in MDK-Professional CAN Driver Keil Real-Time OS RTX Real-Time Operating System Keil Simulated Features NOTE Simulation for this device is provided by the default peripheral simulation driver. Complete peripheral simulation is not available at this time. The following on-chip peripherals are simulated by the Keil Software µVision Debugger. External Interrupts GPIO (32-Bits) Phase Locked Loop Pin Connect Block Power Control Pulse Width Modulator Real Time Clock SPI Interface System Clock Timer 0 Timer 1 UART 0 UART 1 Vectored Interrupt Controller VPB Divider Watchdog Timer The following on-chip peripherals are not simulated. Flash Memory I²C Interface Memory Accelerator Module Memory Mapping Control