Keil™, An ARM® Company

Device Database®

Product Information

Device Database®

Evaluation Software

Compliance Testing

Distributors

  • Overview

    Select your country for a list of the
    distributors available in your area.

Atmel AT91SAM7SE32

The Atmel AT91SAM7SE32 is an ARM7TDMI based High-performance 32-bit RISC Microcontroller with Thumb extensions, - 32K Bytes Flash, 8K Bytes SRAM, clock up to 48 MHz, - USB 2.0 Full Speed, - 88 I/O Pins, Memory Controller, Reset Controller, Clock Generator, Debug Unit, Power Management Controller, Advanced Interrupt Controller, Periodic Interval Timer, Windowed Watchdog, Real-time Clock, 11 Peripheral DMA Controller Channels, 3-channel 16-bit Timer/Counters, 4-channel PWM, Two USARTs, Synchronous Serial Controller, Serial Peripheral Controller, 2wire Interface, 8-channel 10-bit ADC, 4 High-current Drive I/O lines.

[Distributors]

Evaluation Software
Data Sheets
Datasheet Complete for the Atmel AT91SAM7SE32
Datasheet Complete
7,571,298 bytes
Datasheet Summary for the Atmel AT91SAM7SE32
Datasheet Summary
724,059 bytes

Get Adobe Acrobat Reader

Application Notes
Header Files
Emulators
JTAG Debuggers
FLASH Utilities
  • ULINK
    Keil, An ARM Company
Device Programmers
Development Tools
Compiler, Assembler, Linker, Debugger
Simulated Features

The following on-chip peripherals are simulated by the Keil Software µVision Debugger.

The following on-chip peripherals are not simulated.

  • Embedded Flash Controller
  • External Bus Interface
  • Pulse Width Modulation Controller
  • Serial Peripheral Interface
  • Synchronous Serial Controller
  • Two-wire Interface
  • USB Device Interface
Real-Time OS
AGDI Drivers

The following AGDI Drivers are available for the Keil Software µVision Debugger.

Consultants

The following consultants have experience with this device.