 | Device Database® |  |
|
|
Product Information Device Database® Downloads Compliance Testing Distributors | Infineon XC164CS-32FThe Infineon XC164CS-32F is a Microcontroller Built Around the Synthezisable C166S V2 Core with 2K Bytes Dual-port RAM for Register Sets and System Stack, 4K Bytes Data RAM Controlled by DMU, 6K Bytes PSRAM, 8K Bytes Start-up ROM, Internal Instruction Memory Block (IMB) Controlled by PMU, Program Memory Interface (PMI), 256K Bytes Program Flash, Intelligent On-chip Peripheral Subsystems, Automotive-specific Peripherals (ADC and TwinCAN), Debug and Emulation Control Blocks.
Development Tools
Compiler, Assembler, Linker, Debugger |
Data Sheets 
|
| Simulated Features The following on-chip peripherals are simulated by the Keil Software µVision Debugger. - A/D Converter (14 channels)
- Asynchronous/Synchronous Serial Interface ASC0
- Asynchronous/Synchronous Serial Interface ASC1 (without Autobaud)
- Capture/Compare Unit CAPCOM1 with T0 and T1 (without pins)
- Capture/Compare Unit CAPCOM2 with T7 and T8 (12 I/O Pins only)
- Capture/Compare unit CAPCOM6 with T12, T13
- CPU Configuration
- High-Speed Synchronous Serial Interface SSC0
- High-Speed Synchronous Serial Interface SSC1
- Interrupts
- NMI
- PEC
- Port 0 (2 x 8-bit I/O)
- Port 1 (2 x 8-bit I/O)
- Port 20 (5-bit I/O)
- Port 3 (14-bit I/O with Open Drain)
- Port 4 (8-bit I/O with Open Drain)
- Port 5 (14-bit Input with Disable)
- Port 9 (6-bit I/O with Open Drain)
- Real Time Clock
- Reset Configuration
- System Control Unit
- Timer Block GPT1 (T2, T3, T4)
- Timer Block GPT2 (T5, T6)
- Traps
- TwinCAN Module
- Watchdog Timer
The following on-chip peripherals are not simulated. - External Bus Controller
- Flash Program Memory
- Power Management (Peripheral Disabling)
- Programmable Frequency Output Signal
- Register Security Mechanism
- Sleep and Power-Down Mode
|
AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. |
|
|
|
