|
Product Information Device Database® Evaluation Software Compliance Testing Distributors | NXP (founded by Philips) LH75400The NXP (founded by Philips) LH75400 is an ARM7TDMI-S based high-performance 32-bit RISC Microcontroller with Thumb extensions 32KB RAM, Vectored Interrupt Controller, Greyscale LCD Controller, Touch Screen Controller, 8 channel 10 bit A/D Converter, Two 16550-type UARTs, One 82510-type UART, Synchronous Serial Port, Four DMA Channels, CAN 2.0B, Three Timers/Counters with Capture/Compare/PWM, Real Time Clock, Watchdog Timer, General Purpose I/O pins. CPU clock up to 51.6 MHz, On-chip crystal oscillator and On-chip PLL.
Data Sheets 
|
FLASH Utilities - ULINK
Keil, An ARM Company
|
| Development Tools
Compiler, Assembler, Linker, Debugger |
Simulated Features NOTE
Simulation for this device is provided by the default peripheral simulation driver.
Complete peripheral simulation is not available at this time. |
|
AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. |
Consultants The following consultants have experience with this device. |
|
|
|
