STMicroelectronics ST10F276E

The STMicroelectronics ST10F276E is a 16-Bit Microcontroller with Multiply-Accumulate unit (MAC), Dual-CAN 2.0B on-chip device, 111 I/O Lines, Idle & Power Down, Watchdog Timer, Clock 40 MHz, 4-channel PWM, 4 addional XPWM channels, XASC, XSSC, I2C, SSP, UART, 32channel-CAPCOM unit, 24 channel 10bit ADC, 832K Flash, 2 KB On-chip RAM, 66K XRAM, up to 16MB linear address space.

Development Tools Compiler, Assembler, Linker, Debugger CA166 Compiler Kit Keil PK166 Professional Developer's Kit Keil Data Sheets Programming Manual 613,376 bytes Application Notes C167 DC Motor Speed Control Hitex Emulators JTAGjet-166 Signum Systems

Real-Time OS Advanced RTX166 Real-Time Kernel Keil RTX166 Tiny Keil Simulated Features NOTE Simulation for this device is provided by the default peripheral simulation driver. Complete peripheral simulation is not available at this time. The following on-chip peripherals are simulated by the Keil Software µVision Debugger. A/D Converter (16 channels) Asynchronous/Synchronous Serial Interface ASC0 Capture/Compare Unit CAPCOM1 with T0 and T1 Capture/Compare Unit CAPCOM2 with T7 and T8 (P1H.4-7 Inputs Only) Clock Managment with PLL (Without Decimal Factors) CPU with System Configuration High-Speed Synchronous Serial interface SSC Interrupts NMI PEC Port 0 (2 x 8-bit I/O) Port 1 (2 x 8-bit I/O) Port 2 (16-bit I/O with Open Drain) Port 3 (15-bit I/O with Open Drain) Port 4 (8-bit I/O) Port 5 (16-bit Input) Port 6 (8-bit I/O with Open Drain) Port 7 (8-bit I/O with Open Drain) Port 8 (8-bit I/O with Open Drain) PWM (4 channels) Reset Configuration Timer Block GPT1 (T2, T3, T4) Timer Block GPT2 (T5, T6) Traps Watchdog Timer AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. Keil MON166 Driver Keil