|
Product Information Device Database® Evaluation Software Compliance Testing Distributors | Atmel AT89C51CC03The Atmel AT89C51CC03 is an 8051 based CMOS controller with PCA, Dual DPTR, WDT, 10 Bit ADC, Full CAN, 40 MHz High-Speed Architecture, X2 function, 32+2 I/O lines, 3 Timers/Counters, 14 Interrupts/4 priority levels, 64K FLASH, 2K EEPROM, 256 Bytes on-chip RAM, additional 1K XRAM.
Data Sheets 
|
| Development Tools
Compiler, Assembler, Linker, Debugger |
Simulated Features The following on-chip peripherals are simulated by the Keil Software µVision Debugger. - A/D Converter
- CAN Controller
- EEPROM Data Memory
- FLASH with ISP & IAP
- Interrupts 11S/4L (including external)
- PCA Timer with modules
- Ports 0, 1, 2, 3, 4 (5-bit)
- Power save modes (Idle & Power down)
- Serial UART (enhanced interface)
- SPI
- Timer 0, 1, 2 (extended Timer2)
- Watchdog Timer
- X2 mode for CPU and each peripheral with Clock Control
|
AGSI Drivers The following AGSI Drivers are available for the Keil Software µVision Simulator. |
AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. |
Consultants The following consultants have experience with this device. |
|
|
|
