STMicroelectronics ST10F280

The STMicroelectronics ST10F280 is a 16-Bit Microcontroller with Multiply-Accumulate unit (MAC), Dual-CAN 2.0B on-chip device, 143 I/O Lines, Idle & Power Down, Watchdog Timer, Clock 40 MHz, 4-channel PWM, SSP, UART, 32channel-CAPCOM unit, 10bit ADC, 512K Flash, 2 KB On-chip RAM, 16K XRAM, up to 16MB linear address space.

Development Tools Compiler, Assembler, Linker, Debugger CA166 Compiler Kit Keil PK166 Professional Developer's Kit Keil Data Sheets Data Sheet 1,309,445 bytes Programming Manual 613,376 bytes Application Notes C167 DC Motor Speed Control Hitex Header Files REGST10F280.H 17,792 bytes Example Code STMicroelectronics ST10F280 A/D Example Program Evaluation Boards EVA280 FS FORTH Systeme GmbH Emulators DProbeST10 Hitex JTAGjet-166 Signum Systems FLASH Utilities Flash166 FS FORTH Systeme GmbH C16x FLASH Utilities Hitex

Real-Time OS Advanced RTX166 Real-Time Kernel Keil RTX166 Tiny Keil Simulated Features The following on-chip peripherals are simulated by the Keil Software µVision Debugger. A/D Converter (16 channels) Asynchronous/Synchronous Serial Interface ASC0 CAN1 Controller CAN2 Controller Capture/Compare Unit CAPCOM1 with T0 and T1 Capture/Compare Unit CAPCOM2 with T7 and T8 (P1H.4-7 Inputs Only) Clock Managment with PLL CPU with System Configuration High-Speed Synchronous Serial Interface SSC Interrupts NMI PEC Port 0 (2 x 8-bit I/O) Port 1 (2 x 8-bit I/O) Port 2 (16-bit I/O with Open Drain) Port 3 (15-bit I/O with Open Drain) Port 4 (8-bit I/O with Open Drain) Port 5 (16-bit Input with Disable) Port 6 (8-bit I/O with Open Drain) Port 7 (8-bit I/O with Open Drain) Port 8 (8-bit I/O with Open Drain) PWM (Pulse Width Modulator) Real-Time Clock Reset Configuration Timer Block GPT1 (T2, T3, T4) Timer Block GPT2 (T5, T6) Watchdog Timer The following on-chip peripherals are not simulated. Flash Program Memory System Clock Output AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. Keil MON166 Driver Keil