Infineon C167CS-32FM

• CA166 Compiler Kit
  Keil
• PK166 Professional Developer's Kit
  Keil

• C167 DC Motor Speed Control
  Hitex

• C167CS.H
  25,187 bytes

• C16x/ST10 Bit I/O Example Program
• C16x/ST10 PEC Example Program
• C16x/ST10 Watchdog Timer Example Program
• Infineon C167 A/D Example Program

• 07. phyCORE-167 System on Module (SOM)
  Phytec
• 08. phyCORE-167 HS/E System on Module (SOM)
  Phytec

• DProbe167
  Hitex
• C166 & C166S-V2
  Nohau Corporation
• JTAGjet-166
  Signum Systems

• FLASHER
  Bluewind
• Flash166
  FS FORTH Systeme GmbH
• C16x FLASH Utilities
  Hitex
• FlashTools
  Phytec

• Advanced RTX166 Real-Time Kernel
  Keil
• RTX166 Tiny
  Keil

The following on-chip peripherals are simulated by the Keil Software µVision Debugger.

• A/D Converter (24 channels)
• Asynchronous/Synchronous Serial Interface ASC0
• CAN1 Controller
• CAN2 Controller
• Capture/Compare Unit CAPCOM1 with T0 and T1
• Capture/Compare Unit CAPCOM2 with T7 and T8
• Clock Managment with PLL and Slow Down Divider
• CPU with System Configuration
• High-Speed Synchronous Serial Interface SSC
• Interrupts
• NMI
• PEC
• Port 0 (2 x 8-bit I/O)
• Port 1 (2 x 8-bit I/O with Disable)
• Port 2 (16-bit I/O with Open Drain)
• Port 3 (15-bit I/O with Open Drain)
• Port 4 (8-bit I/O with Open Drain)
• Port 5 (16-bit Input with Disable)
• Port 6 (8-bit I/O with Open Drain)
• Port 7 (8-bit I/O with Open Drain)
• Port 8 (8-bit I/O with Open Drain)
• PWM (Pulse Width Modulator)
• Real-Time Clock
• Reset Configuration
• Timer Block GPT1 (T2, T3, T4)
• Timer Block GPT2 (T5, T6)
• Traps
• Watchdog Timer (With Additional Prescaler)

The following on-chip peripherals are not simulated.

• Data FLASH/EEPROM
• Flash Program Memory
• Power Management (Peripheral Disabling)
• Security Mechanism for SYSCON1/2/3
• Sleep Mode
• System Clock Output and Programmable Frequency Output Signal

The following AGDI Drivers are available for the Keil Software µVision Debugger.

• Keil MON166 Driver
  Keil