|
Product Information Device Database® Evaluation Software Compliance Testing Distributors | Atmel T89C51CC02The Atmel T89C51CC02 is an 8051 based low pin count CMOS controller with PCA, Dual DPTR, WDT, 10 Bit ADC, 4-ch. CAN, 33MHz High-Speed Architecture, X2 function, 16/20 I/O lines, 3 Timers/Counters, 14 Interrupts/4 priority levels, 16K FLASH, 2K EEPROM, 256 Bytes on-chip RAM, additional 256 Bytes XRAM.
Data Sheets 
|
| Development Tools
Compiler, Assembler, Linker, Debugger |
Simulated Features The following on-chip peripherals are simulated by the Keil Software µVision Debugger. - A/D Converter
- CAN Controller (Only 4 Message Objects)
- EEPROM Data Memory
- Flash with ISP and IAP
- Interrupts 10S/4L (Including External)
- PCA Timer with Modules (Only 2 Channels)
- Port 0
- Port 1 (2 bits)
- Port 2
- Port 3 (2 bits)
- Power Saving Modes (Idle and Power Down)
- Serial UART (Enhanced Interface)
- SPI
- Timer 0
- Timer 1
- Timer 2 (Extended Timer 2)
- Watchdog Timer
- X2 Mode for CPU and Each Peripheral with Clock Control
The following on-chip peripherals are not simulated. |
AGSI Drivers The following AGSI Drivers are available for the Keil Software µVision Simulator. |
AGDI Drivers The following AGDI Drivers are available for the Keil Software µVision Debugger. |
Consultants The following consultants have experience with this device. |
|
|
|
