|
||
| Products Download Events Support Videos | ||
Technical Support
On-Line Manuals
MCBXC167 User's Guide
Introduction
Setup
Theory of Operation
Writing Programs
Example Programs
MON166 BLINKY
Building BLINKY
Downloading BLINKY
Debugging BLINKY
Checking Serial Output
OCDS BLINKY
Building BLINKY
Downloading BLINKY
Debugging BLINKY
Checking Serial Output
EASYWEB
Set DIP Switches for EASYWEB
Building EASYWEB
Downloading EASYWEB
Debugging EASYWEB
Checking Output
PLL_DEMO
Set DIP Switches for PLL_DEMO
Building PLL_DEMO
Downloading PLL_DEMO
Debugging PLL_DEMO
Checking Output
TwinCAN
Building TwinCAN
Downloading TwinCAN
Debugging TwinCAN
Checking Output
Infineon Memtool Utility
Startup Code
Downloading BLINKY
When the BLINKY build is complete, you may download the HEX file to the on-chip Flash ROM of the Infineon XC167 device on the MCBXC167 Evaluation Board.
Load the executable file into either the on-chip or external Flash ROM. Your program must be Flash programmed into the ROM before you can debug it (except when on the external RAM target).
In
this BLINKY example, both Flash targets are already configured with
the appropriate Flash Programming Algorithm. Just click the Flash
Download button to download the compiled program to the MCBXC167
board.
Note
- If you enable "Update Target before Debugging" under Options for Target - Utilities, the Flash ROM on your MCBXC167 is automatically programmed when you enter the Debug Mode.
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Contact |
 |
||||