Features

The connectors on the MCBTWRK60 evaluation board provide easy access to many of the on-chip peripherals.

• USB 2.0 Full Speed Interface
  Standard USB connectors for USB Device, USB-OTG, USB Host and UART via USB on the MCBTWRK60 board for applications requiring USB communications.
• Serial Port
  A standard DB9 connector on the Serial board for Kinetis's serial port provides RS232 and RS485 connectivity.
• 100/10M Ethernet Port
  A standard RJ45 connector on the MCBTWRK60 Serial board connects to an on-board Ethernet transceiver for applications requiring Ethernet communications.
• CAN Interface
  A 3-pin header for applications requiring CAN communications on the MCBTWRK60 Serial board.
• Accelerometer
  A 3-axis accelerometer for detecting and measuring motion in 3 dimensions on the MCBTWRK60 Serial board.
• Touch Interface
  Four touch pads on the TWR-K60N512 board connected to the Touch Sensing Input module in the MCU allow them to be used as push buttons in your application.
• SD Card Connector
  A SD Card connector for developing applications requiring access to SD Cards.
• Analog Voltage Control for ADC Input
  An adjustable analog voltage source is on the TWR-K60N512 board for testing the Analog to Digital output feature of the Kinetis device. A configuration jumper enables and disables this feature.
• JTAG and Cortex/ETM Download and Debug
  The TWR-K60N512 board incorporates a Cortex Debug + ETM interface. When coupled with the ULINK2 USB-JTAG adapter, the Serial Wire JTAG interface allows flash programming and debugging. With the ULINKPro adapter, the Cortex Debug/ETM interface allows flash programming and instruction trace debugging.