Keil Logo

Checking Program Output

Start the program running either from the debugger or by cycling power on the board. The LCD panel displays the:

  • Board name.
  • Program name.
  • www.keil.com.
  • Light and Temperature as bar graphs.
  • AD Light and AD Temperature HEX values.

Checking Serial Output

  1. Connect a USB A-to-miniB cable to the connector USB Mini (XDS100V2) of the MCU board.
  2. Connect the USB cable to the PC.
  3. Install the min-USB Drivers, if required.
  4. Open a terminal emulation program, such as HyperTerminal, to display the serial data.
  5. Enter a Name for the new connection, for example: MCBTMS570.

    HyperTerm Connection Description Dialog
  6. Select the PC COM port that is defined in the Device Manager.

    HyperTerm Connect To Dialog
  7. Select 115200 Bits per second, 8 Data bits, Parity None, Stop bits 1 and Flow control None.

    HyperTerm Properties Dialog
  8. Click OK. The serial message displays the "AD Light" and "AD Temp" values.

    HyperTerm screen showing results
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.