Keil Logo

Features

The connectors on the evaluation board provide easy access to many of the STM32F207's on-chip peripherals.

  • Serial Port
    A standard DB9 connector is on the board for the STM32F207's built-in UART interfaces. This is a full duplex, serial port.
  • CAN Port
    A standard DB9 connector for applications requiring CAN communications.
  • USB 2.0 Full Speed and High Speed Ports
    2 standard USB Type mini-B connectors: One for full-speed and one for high-speed USB Device, Host and OTG communications.
  • 100/10M Ethernet Port
    A standard RJ45 connector on the MCBSTM32F200 board connects to an on-board Ethernet transceiver for applications requiring Ethernet communications.
  • VGA Camera and Microphone
    A 640 x 480 Color CMOS camera and on-board digital microphone for VGA image and digital sound capture.
  • LCD Display with Touch Screen
    A detachable, 240x320 TFT, color LCD display with 4-wire, resistive touch screen. You may use this graphic display device to show real-time debug and program status messages.
  • Stereo CODEC and Amplifier and On-board Microphone
    A low-power stereo CODEC with headphone and microphone amplifier. You may use this on-board device for audio applications.
  • Motion Detectors
    Both a low-power, 3-axis accelerometer and a 3-axis MEMS inertial rate sensor(gyroscope). You may use these on-board devices for applications requiring the detection of movement.
  • On-board Battery
    A removable, lithium battery is included on the MCBSTM32F200 to maintain power to the real-time clock when the board disconnects from the main power supply.
  • Analog Voltage Control for ADC Input
    An adjustable analog voltage source for testing the Analog to Digital converter built into the STM32F207 device.
  • MicroSD Card Connector
    A MicroSD Card connector for developing applications requiring access to MicroSD Cards.
  • External Memory
    The MCBSTM32F200 board includes:
    • 2 MB External SRAM
    • 8 MB External NOR Flash
    • 512 MB External NAND Flash
    • 8 KB EEPROM (I2C) with NFC (wireless near field communication) interface
  • JTAG and Cortex/ETM Download and Debug
    The MCBSTM32F200 board incorporates both a JTAG interface and a Cortex Debug + ETM interface.  When coupled with the ULINK2 USB-JTAG adapter, the Serial Wire JTAG interface allows flash programming and debugging.  With the ULINKPro adapter, the Cortex Debug/ETM interface allows flash programming and instruction trace debugging.
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.