Keil Logo

Set Target Options

Set Target Options to configure the speed and memory usage of the device.

If the startup code has been included into the project, µVision provides the correct default configuration values for most devices. However, in case the values have to be added manually:

  1. Open the dialog Project — Options for Target - Target.

    Options for Target

  2. Enter 12.0 into the field XTAL (MHz) to set the oscillator frequency.
  3. Set the memory ROM area of the target system in IROM1. Enable the default checkbox. Enter 0x0 for the Start address and 0x8000 for the Size. The device has on-chip ROM from 0x0 to 0x7FFF for a total of 0x8000 bytes.
  4. Set the RAM memory area of the target system in IRAM1. Enable the default checkbox. Enter 0x10000000 for the Start address and 0x2000 for the Size. The device has on-chip RAM from 0x10000000 to 0x10001FFF for a total of 0x2000 bytes.

Note

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.