CMSIS-DAP  Version 2.0.0
Interface Firmware for CoreSight Debug Access Port
 All Functions Groups Pages
DAP_SWD_Configure

Configure SWD Protocol. More...

Configure SWD Protocol.

The DAP_SWD_Configure Command sets the SWD protocol configuration. For more information about the SWD protocol refer to the Arm Debug Interface v5 - Interface Specification.

DAP_SWD_Configure Command:

| BYTE | BYTE *********|
> 0x13 | Configuration |
|******|***************|

DAP_SWD_Configure Response:

| BYTE | BYTE **|
< 0x13 | Status |
|******|********|