CMSIS-Zone  Version 1.2.0-alpha
System Resource Management
 All Files Pages
Error Messages

The following table explains the output messages issued by CMSIS-Zone utility.

Message Description
Error Z101: <name>: Invalid memory size Size of the memory region is invalid or negative
Error Z102: <name>: Memory size exceeds parent region size Size of the sub-memory region exceeds the available memory in the parent
Error Z103: <name>: Invalid memory offset Offset of the sub-memory region is invalid or negative
Error Z104: <name>: Memory offset is outside parent boundary Offset of the sub-memory region is outside of the available memory in the parent
Error Z105: <name>: Memory exceeds parent region boundary The sub-memory region exceeds the limits of physical memory space in the parent
Error Z106: <name>: Memory region cannot be arranged: no physical slot is available The memory region cannot be arranged as there is no physical memory space available
Error Z107: <name>: Memory region fully overlaps with region <name> The sub-memory region overlaps with another memory region
Error Z108: <name>: Memory region partially overlaps with region <name> The sub-memory region overlaps with another memory region
Error Z110: <name>: Number of available MPU slots is exceeded There are not enough MPU regions to allocate the required resources
Error Z111: No MPU slot can be allocated according to ArmV7 requirements There are not enough MPU regions to allocate the required resources
Error Z112: <name>: Memory size is rounded up to align with ArmV7 MPU requirements The Memory size of the region is increased due to MPU alignment restrictions
Error Z120: No startup memory region is specified There is not memory region for the reset vector (startup) defined
Error Z121: Multiple startup memory regions are specified There is more then one region for the reset vector (startup) defined
Error Z201: <name>: Memory region is missing The memory region in the assignment *.azone file is missing in the resource *.rzone file
Error Z202: <name>: Peripheral group is missing The peripheral group in the assignment *.azone file is missing in the resource *.rzone file
Error Z203: <name>: Peripheral is missing The peripheral in the assignment *.azone file is missing in the resource *.rzone file
Error Z401: <name>: Device description is missing The device specification in the resource *.rzone file is incomplete
Error Z402: <name>: Device pack is not specified The device specification in the resource *.rzone file is incomplete
Error Z403: <name>: Device pack specification is invalid The device specification in the resource *.rzone file is incomplete
Error Z404: <name>: Resource file is missing The resource *.rzone file referenced by the assignment *.azone file is missing
Error Z405: <name>: Error reading resource file The resource *.rzone file has an incorrect format
Error Z406: <name>: Processor description is missing The processor specification in the resource *.rzone file is incomplete
Error Z407: <name>: Processor description: missing or invalid DnumInterrupts attribute for TrustZone device The processor specification in the resource *.rzone file is incomplete
Error Z408: <name>: Processor description: missing or invalid DnumSauRegions attribute for TrustZone device The processor specification in the resource *.rzone file is incomplete
Error Z501: <name>: Creating sub-zone files failed The sub-zone resource files cannot be created
Error Z601: <name>: creating FreeMarker model failed The FreeMarker model *.fzone file cannot be created
Error Z602: <name>: processing template file failed The FreeMarker model template file cannot be processed
Error Z603: <name>: processing template file failed The FreeMarker model template file cannot be processed
Error Z604: <name>: folder contains no template files There are no FreeMarker model template files