 |
CMSIS-DAP
Version 2.1.1
Interface Firmware for CoreSight Debug Access Port
|
|
CMSIS-DAP
Version 2.1.1
Interface Firmware for CoreSight Debug Access Port
|
DAP_config.h configures I/O ports and debug unit hardware parameters. More...
Content | |
| CMSIS-DAP Debug Unit Information | |
| Provides definitions about the hardware and configuration of the Debug Unit. | |
| CMSIS-DAP Hardware I/O Pin Access | |
| Standard I/O Pins of the CMSIS-DAP Hardware Debug Port support standard JTAG mode and Serial Wire Debug (SWD) mode. | |
| CMSIS-DAP Hardware Status LEDs | |
| CMSIS-DAP Hardware may provide LEDs that indicate the status of the CMSIS-DAP Debug Unit. | |
| CMSIS-DAP Timestamp | |
| Access function for Test Domain Timer. | |
| CMSIS-DAP Initialization | |
| CMSIS-DAP Hardware I/O and LED Pins are initialized with the function DAP_SETUP. | |
DAP_config.h configures I/O ports and debug unit hardware parameters.
The CMSIS-DAP firmware configuration file DAP_config.h provides the interface functions and configuration parameters for the hardware of the CMSIS-DAP debug unit.
