GigaDevice GD32F107RG
ARM Cortex-M3, 108 MHz, 1 MB ROM, 96 kB RAM
GD32F107 - ARM Cortex-M3 Core Frequency up to 108 MHz Single-cycle multiplier and hardware divider NVIC support 16 internal and 43 external interrupts, each interrupt has 16 priority levels Flash memory Flash up to 1024 KB SRAM up to 96 KB 2KB ISP loader ROM
- NVIC:NVIC with 68 interrupt sources
- DMA:12 -channel General Purpose DMA with Centralized FIFO and Burst Support
- Processor:Cortex-M3, 108 MHz
- Other:1 x CRC Calculation Unit
- ROM:1 MB
- RAM:96 kB
- External Oscillator:4 MHz 16 MHz External Crystal Oscillator
- Internal RC:8 MHz Internal RC Oscillator
- Supply Voltage:2.6 V .. 3.6 V Operating Voltage
- Power Modes:4 Power Modes: Run, Sleep, Deep-Sleep, Standby
- Maximum Clock Frequency:108 MHz,
- RTC:32 kHz RTC with 32.768 kHz calibrated Oscillator and Battery Backup
- PLL:3 Hz Internal PLL
- SPI:3 x SPI Interface
- I2C:2 x Low-Power I2C
- UART:2 x High-Speed UART Interface
- I2S:2 x I2S Interface
- USART:3 x High-Speed USART Interface
- CAN:2 x CAN 2.0b Controller
- USB, OTG:2 x High-Speed/Full-Speed USB OTG with PHY
- Ethernet:1 x 100000000 Integrated Ethernet MAC with PHY
- Multi-Purpose Serial Peripheral:4 x Multi-Purpose Serial Interface Module: I2C, I2S, SPI, USART
- Watchdog:2 x Watchdog timer
- Timer/Counter:10 x 16-bit 16-bit General Purpose Timer
- Timer/Counter:2 x 16-bit Advanced Timer
- Timer/Counter:2 x 16-bit Basic Timer
- Timer/Counter:1 x 24-bit SysTick Timer
- ADC:3-channel x 12 bit ADC
- DAC:2-channel x 12 bit DAC
- Temperature Sensor:1 x Temperature sensor
- Operating Temperature Range:-40 °C .. 85 °C Extended Operating Temperature Range
- I/Os:112 IO pins
- External Interrupts:20 External interrupt
- Other:1 x My other Interface
Development Tools | |
CMSIS Drivers | No CMSIS-Driver in Device Family Pack. |