//****************************************************************************
// @Module Project Settings
// @Filename MAIN.H
// @Project XC864.dav
//----------------------------------------------------------------------------
// @Controller Infineon XC864L-1FR
//
// @Compiler Keil
//
// @Codegenerator 0.1
//
// @Description This is the include header file for all other modules.
//
//----------------------------------------------------------------------------
// @Date 11.07.2008 09:09:38
//
//****************************************************************************
// USER CODE BEGIN (MAIN_Header,1)
// USER CODE END
#ifndef _MAIN_H_
#define _MAIN_H_
//****************************************************************************
// @Project Includes
//****************************************************************************
// USER CODE BEGIN (MAIN_Header,2)
// USER CODE END
//****************************************************************************
// @Macros
//****************************************************************************
// Please ensure that SCU_PAGE is switched to Page 1 before using these macros
#define MAIN_vUnlockProtecReg() PASSWD = 0x9B
#define MAIN_vlockProtecReg() PASSWD = 0xAB
// USER CODE BEGIN (MAIN_Header,3)
// USER CODE END
//****************************************************************************
// @Defines
//****************************************************************************
// USER CODE BEGIN (MAIN_Header,4)
// USER CODE END
#define bool bit
#define ulong unsigned long
#define uword unsigned int
#define ubyte unsigned char
#define KEIL
//****************************************************************************
// @Prototypes Of Global Functions
//****************************************************************************
// USER CODE BEGIN (MAIN_Header,5)
// USER CODE END
// -------------------------------------------------------------------------
// Declaration of SFRs
// -------------------------------------------------------------------------
// Notes: You can avoid the problem that your compiler does not yet support
// the latest derivatives if you use the SFR definitions generated
// by DAvE instead of those that come along with your compiler (in
// the "Register File").
// PORT SFRs are defined in file 'IO.H'.
// SFR byte definitions
sfr ACC = 0xE0;
sfr ADC_CHCTR0 = 0xCA;
sfr ADC_CHCTR1 = 0xCB;
sfr ADC_CHCTR2 = 0xCC;
sfr ADC_CHCTR7 = 0xD3;
sfr ADC_CHINCR = 0xCB;
sfr ADC_CHINFR = 0xCA;
sfr ADC_CHINPR = 0xCD;
sfr ADC_CHINSR = 0xCC;
sfr ADC_CRCR1 = 0xCA;
sfr ADC_CRMR1 = 0xCC;
sfr ADC_CRPR1 = 0xCB;
sfr ADC_ETRCR = 0xCF;
sfr ADC_EVINCR = 0xCF;
sfr ADC_EVINFR = 0xCE;
sfr ADC_EVINPR = 0xD3;
sfr ADC_EVINSR = 0xD2;
sfr ADC_GLOBCTR = 0xCA;
sfr ADC_GLOBSTR = 0xCB;
sfr ADC_INPCR0 = 0xCE;
sfr ADC_LCBR = 0xCD;
sfr ADC_PAGE = 0xD1;
sfr ADC_PRAR = 0xCC;
sfr ADC_Q0R0 = 0xCF;
sfr ADC_QBUR0 = 0xD2;
sfr ADC_QINR0 = 0xD2;
sfr ADC_QMR0 = 0xCD;
sfr ADC_QSR0 = 0xCE;
sfr ADC_RCR0 = 0xCA;
sfr ADC_RCR1 = 0xCB;
sfr ADC_RCR2 = 0xCC;
sfr ADC_RCR3 = 0xCD;
sfr ADC_RESR0H = 0xCB;
sfr ADC_RESR0L = 0xCA;
sfr ADC_RESR1H = 0xCD;
sfr ADC_RESR1L = 0xCC;
sfr ADC_RESR2H = 0xCF;
sfr ADC_RESR2L = 0xCE;
sfr ADC_RESR3H = 0xD3;
sfr ADC_RESR3L = 0xD2;
sfr ADC_RESRA0H = 0xCB;
sfr ADC_RESRA0L = 0xCA;
sfr ADC_RESRA1H = 0xCD;
sfr ADC_RESRA1L = 0xCC;
sfr ADC_RESRA2H = 0xCF;
sfr ADC_RESRA2L = 0xCE;
sfr ADC_RESRA3H = 0xD3;
sfr ADC_RESRA3L = 0xD2;
sfr ADC_VFCR = 0xCE;
sfr B = 0xF0;
sfr BCON = 0xBD;
sfr BG = 0xBE;
sfr CCU6_CC60RH = 0xFB;
sfr CCU6_CC60RL = 0xFA;
sfr CCU6_CC60SRH = 0xFB;
sfr CCU6_CC60SRL = 0xFA;
sfr CCU6_CC61RH = 0xFD;
sfr CCU6_CC61RL = 0xFC;
sfr CCU6_CC61SRH = 0xFD;
sfr CCU6_CC61SRL = 0xFC;
sfr CCU6_CC62RH = 0xFF;
sfr CCU6_CC62RL = 0xFE;
sfr CCU6_CC62SRH = 0xFF;
sfr CCU6_CC62SRL = 0xFE;
sfr CCU6_CC63RH = 0x9B;
sfr CCU6_CC63RL = 0x9A;
sfr CCU6_CC63SRH = 0x9B;
sfr CCU6_CC63SRL = 0x9A;
sfr CCU6_CMPMODIFH = 0xA7;
sfr CCU6_CMPMODIFL = 0xA6;
sfr CCU6_CMPSTATH = 0xFF;
sfr CCU6_CMPSTATL = 0xFE;
sfr CCU6_IENH = 0x9D;
sfr CCU6_IENL = 0x9C;
sfr CCU6_INPH = 0x9F;
sfr CCU6_INPL = 0x9E;
sfr CCU6_ISH = 0x9D;
sfr CCU6_ISL = 0x9C;
sfr CCU6_ISRH = 0xA5;
sfr CCU6_ISRL = 0xA4;
sfr CCU6_ISSH = 0xA5;
sfr CCU6_ISSL = 0xA4;
sfr CCU6_MCMCTR = 0xA7;
sfr CCU6_MCMOUTH = 0x9B;
sfr CCU6_MCMOUTL = 0x9A;
sfr CCU6_MCMOUTSH = 0x9F;
sfr CCU6_MCMOUTSL = 0x9E;
sfr CCU6_MODCTRH = 0xFD;
sfr CCU6_MODCTRL = 0xFC;
sfr CCU6_PAGE = 0xA3;
sfr CCU6_PISEL0H = 0x9F;
sfr CCU6_PISEL0L = 0x9E;
sfr CCU6_PISEL2 = 0xA4;
sfr CCU6_PSLR = 0xA6;
sfr CCU6_T12DTCH = 0xA5;
sfr CCU6_T12DTCL = 0xA4;
sfr CCU6_T12H = 0xFB;
sfr CCU6_T12L = 0xFA;
sfr CCU6_T12MSELH = 0x9B;
sfr CCU6_T12MSELL = 0x9A;
sfr CCU6_T12PRH = 0x9D;
sfr CCU6_T12PRL = 0x9C;
sfr CCU6_T13H = 0xFD;
sfr CCU6_T13L = 0xFC;
sfr CCU6_T13PRH = 0x9F;
sfr CCU6_T13PRL = 0x9E;
sfr CCU6_TCTR0H = 0xA7;
sfr CCU6_TCTR0L = 0xA6;
sfr CCU6_TCTR2H = 0xFB;
sfr CCU6_TCTR2L = 0xFA;
sfr CCU6_TCTR4H = 0x9D;
sfr CCU6_TCTR4L = 0x9C;
sfr CCU6_TRPCTRH = 0xFF;
sfr CCU6_TRPCTRL = 0xFE;
sfr CMCON = 0xBA;
sfr COCON = 0xBE;
sfr DPH = 0x83;
sfr DPL = 0x82;
sfr EO = 0xA2;
sfr EXICON0 = 0xB7;
sfr FDCON = 0xE9;
sfr FDRES = 0xEB;
sfr FDSTEP = 0xEA;
sfr FEAH = 0xBD;
sfr FEAL = 0xBC;
sfr HWBPDR = 0xF7;
sfr HWBPSR = 0xF6;
sfr ID = 0xB3;
sfr IEN0 = 0xA8;
sfr IEN1 = 0xE8;
sfr IP = 0xB8;
sfr IP1 = 0xF8;
sfr IPH = 0xB9;
sfr IPH1 = 0xF9;
sfr IRCON0 = 0xB4;
sfr IRCON1 = 0xB5;
sfr IRCON3 = 0xB4;
sfr IRCON4 = 0xB5;
sfr MISC_CON = 0xE9;
sfr MMBPCR = 0xF3;
sfr MMCR = 0xF1;
sfr MMCR2 = 0xE9;
sfr MMDR = 0xF5;
sfr MMICR = 0xF4;
sfr MMSR = 0xF2;
sfr MODPISEL = 0xB3;
sfr MODSUSP = 0xBD;
sfr NMICON = 0xBB;
sfr NMISR = 0xBC;
sfr P0_ALTSEL0 = 0x80;
sfr P0_ALTSEL1 = 0x86;
sfr P0_DATA = 0x80;
sfr P0_DIR = 0x86;
sfr P0_OD = 0x80;
sfr P0_PUDEN = 0x86;
sfr P0_PUDSEL = 0x80;
sfr P1_ALTSEL0 = 0x90;
sfr P1_ALTSEL1 = 0x91;
sfr P1_DATA = 0x90;
sfr P1_DIR = 0x91;
sfr P1_OD = 0x90;
sfr P1_PUDEN = 0x91;
sfr P1_PUDSEL = 0x90;
sfr P2_DATA = 0xA0;
sfr P2_DIR = 0xA1;
sfr P2_PUDEN = 0xA1;
sfr P2_PUDSEL = 0xA0;
sfr P3_ALTSEL0 = 0xB0;
sfr P3_ALTSEL1 = 0xB1;
sfr P3_DATA = 0xB0;
sfr P3_DIR = 0xB1;
sfr P3_OD = 0xB0;
sfr P3_PUDEN = 0xB1;
sfr P3_PUDSEL = 0xB0;
sfr PASSWD = 0xBB;
sfr PCON = 0x87;
sfr PLL_CON = 0xB7;
sfr PMCON0 = 0xB4;
sfr PMCON1 = 0xB5;
sfr PORT_PAGE = 0xB2;
sfr PSW = 0xD0;
sfr SBUF = 0x99;
sfr SCON = 0x98;
sfr SCU_PAGE = 0xBF;
sfr SP = 0x81;
sfr SSC_BRH = 0xAF;
sfr SSC_BRL = 0xAE;
sfr SSC_CONH_O = 0xAB;
sfr SSC_CONH_P = 0xAB;
sfr SSC_CONL_O = 0xAA;
sfr SSC_CONL_P = 0xAA;
sfr SSC_PISEL = 0xA9;
sfr SSC_RBL = 0xAD;
sfr SSC_TBL = 0xAC;
sfr SYSCON0 = 0x8F;
sfr T2_RC2H = 0xC3;
sfr T2_RC2L = 0xC2;
sfr T2_T2CON = 0xC0;
sfr T2_T2H = 0xC5;
sfr T2_T2L = 0xC4;
sfr T2_T2MOD = 0xC1;
sfr TCON = 0x88;
sfr TH0 = 0x8C;
sfr TH1 = 0x8D;
sfr TL0 = 0x8A;
sfr TL1 = 0x8B;
sfr TMOD = 0x89;
sfr WDTCON = 0xBB; // located in the mapped SFR area
sfr WDTH = 0xBF; // located in the mapped SFR area
sfr WDTL = 0xBE; // located in the mapped SFR area
sfr WDTREL = 0xBC; // located in the mapped SFR area
sfr WDTWINB = 0xBD; // located in the mapped SFR area
sfr XADDRH = 0xB3;
// SFR bit definitions
// IEN0
sbit EA = 0xAF;
sbit ES = 0xAC;
sbit ET0 = 0xA9;
sbit ET1 = 0xAB;
sbit ET2 = 0xAD;
sbit EX0 = 0xA8;
sbit EX1 = 0xAA;
// IEN1
sbit EADC = 0xE8;
sbit ECCIP0 = 0xEC;
sbit ECCIP1 = 0xED;
sbit ECCIP2 = 0xEE;
sbit ECCIP3 = 0xEF;
sbit ESSC = 0xE9;
sbit EX2 = 0xEA;
sbit EXM = 0xEB;
// IP1
sbit PADC = 0xF8;
sbit PCCIP0 = 0xFC;
sbit PCCIP1 = 0xFD;
sbit PCCIP2 = 0xFE;
sbit PCCIP3 = 0xFF;
sbit PSSC = 0xF9;
sbit PX2 = 0xFA;
sbit PXM = 0xFB;
// IP
sbit PS = 0xBC;
sbit PT0 = 0xB9;
sbit PT1 = 0xBB;
sbit PT2 = 0xBD;
sbit PX0 = 0xB8;
sbit PX1 = 0xBA;
// PSW
sbit AC = 0xD6;
sbit CY = 0xD7;
sbit F0 = 0xD5;
sbit F1 = 0xD1;
sbit OV = 0xD2;
sbit P = 0xD0;
sbit RS0 = 0xD3;
sbit RS1 = 0xD4;
// SCON
sbit RB8 = 0x9A;
sbit REN = 0x9C;
sbit RI = 0x98;
sbit SM0 = 0x9F;
sbit SM1 = 0x9E;
sbit SM2 = 0x9D;
sbit TB8 = 0x9B;
sbit TI = 0x99;
// T2_T2CON
sbit CP_RL2 = 0xC0;
sbit EXEN2 = 0xC3;
sbit EXF2 = 0xC6;
sbit TF2 = 0xC7;
sbit TR2 = 0xC2;
// TCON
sbit IE0 = 0x89;
sbit IE1 = 0x8B;
sbit IT0 = 0x88;
sbit IT1 = 0x8A;
sbit TF0 = 0x8D;
sbit TF1 = 0x8F;
sbit TR0 = 0x8C;
sbit TR1 = 0x8E;
// Definition of the 16-bit SFR
// sfr16 data type to access two 8-bit SFRs as a single 16-bit SFR.
sfr16 CCU6_CC60RLH = 0xFA; // 16-bit Address
sfr16 CCU6_CC60SRLH = 0xFA; // 16-bit Address
sfr16 CCU6_CC61RLH = 0xFC; // 16-bit Address
sfr16 CCU6_CC61SRLH = 0xFC; // 16-bit Address
sfr16 CCU6_CC62RLH = 0xFE; // 16-bit Address
sfr16 CCU6_CC62SRLH = 0xFE; // 16-bit Address
sfr16 CCU6_CC63RLH = 0x9A; // 16-bit Address
sfr16 CCU6_CC63SRLH = 0x9A; // 16-bit Address
sfr16 CCU6_T12LH = 0xFA; // 16-bit Address
sfr16 CCU6_T12PRLH = 0x9C; // 16-bit Address
sfr16 CCU6_T13LH = 0xFC; // 16-bit Address
sfr16 CCU6_T13PRLH = 0x9E; // 16-bit Address
sfr16 T2_RC2LH = 0xC2; // 16-bit Address
sfr16 T2_T2LH = 0xC4; // 16-bit Address
// Definition of the PAGE SFR
// PORT_PAGE
#define _pp0 PORT_PAGE=0 // PORT_PAGE postfix
#define _pp1 PORT_PAGE=1 // PORT_PAGE postfix
#define _pp2 PORT_PAGE=2 // PORT_PAGE postfix
#define _pp3 PORT_PAGE=3 // PORT_PAGE postfix
// ADC_PAGE
#define _ad0 ADC_PAGE=0 // ADC_PAGE postfix
#define _ad1 ADC_PAGE=1 // ADC_PAGE postfix
#define _ad2 ADC_PAGE=2 // ADC_PAGE postfix
#define _ad3 ADC_PAGE=3 // ADC_PAGE postfix
#define _ad4 ADC_PAGE=4 // ADC_PAGE postfix
#define _ad5 ADC_PAGE=5 // ADC_PAGE postfix
#define _ad6 ADC_PAGE=6 // ADC_PAGE postfix
// SCU_PAGE
#define _su0 SCU_PAGE=0 // SCU_PAGE postfix
#define _su1 SCU_PAGE=1 // SCU_PAGE postfix
#define _su2 SCU_PAGE=2 // SCU_PAGE postfix
// CCU6_PAGE
#define _cc0 CCU6_PAGE=0 // CCU6_PAGE postfix
#define _cc1 CCU6_PAGE=1 // CCU6_PAGE postfix
#define _cc2 CCU6_PAGE=2 // CCU6_PAGE postfix
#define _cc3 CCU6_PAGE=3 // CCU6_PAGE postfix
#define SST0 0x80 // Save SFR page to ST0
#define RST0 0xC0 // Restore SFR page from ST0
#define SST1 0x90 // Save SFR page to ST1
#define RST1 0xD0 // Restore SFR page from ST1
#define SST2 0xA0 // Save SFR page to ST2
#define RST2 0xE0 // Restore SFR page from ST2
#define SST3 0xB0 // Save SFR page to ST3
#define RST3 0xF0 // Restore SFR page from ST3
#define noSST 0x00 // Switch page without saving
#define SFR_PAGE(pg,op) pg+op
// SYSCON0_RMAP
// The access to the mapped SFR area is enabled.
#define SET_RMAP() SYSCON0 |= 0x01
// The access to the standard SFR area is enabled.
#define RESET_RMAP() SYSCON0 &= ~0x01
#define _su SCU_PAGE // SCU_PAGE
#define STR_PAGE(pg,op) { _push_(op); \
pg ; }
#define RST_PAGE(op) _pop_(op)
//****************************************************************************
// @Typedefs
//****************************************************************************
// USER CODE BEGIN (MAIN_Header,6)
// USER CODE END
//****************************************************************************
// @Imported Global Variables
//****************************************************************************
// USER CODE BEGIN (MAIN_Header,7)
// USER CODE END
//****************************************************************************
// @Global Variables
//****************************************************************************
// USER CODE BEGIN (MAIN_Header,8)
// USER CODE END
//****************************************************************************
// @Prototypes Of Global Functions
//****************************************************************************
// USER CODE BEGIN (MAIN_Header,9)
// USER CODE END
//****************************************************************************
// @Interrupt Vectors
//****************************************************************************
// USER CODE BEGIN (MAIN_Header,10)
// USER CODE END
//****************************************************************************
// @Project Includes
//****************************************************************************
#include <intrins.h>
// USER CODE BEGIN (MAIN_Header,11)
// USER CODE END
#endif // ifndef _MAIN_H_