CMSIS-RTOS2 Blinky example with VIO

Presentation of the MPU feature. This example configures a memory area as privileged read-only, and attempts to perform read and write operations in different modes.

How to modify the Thread mode privilege access and stack. Thread mode is entered on reset or when returning from an exception.

How to modify the Thread mode stack. Thread mode is entered on reset, and can be entered as a result of an exception return.

How to use the default SysTick configuration with a 1 ms timebase to toggle LEDs.

How to configure the CRC using the HAL API. The CRC (cyclic redundancy check) calculation unit computes 7-bit CRC codes derived from buffers of 8-bit data (bytes). The user-defined generating polynomial is manually set to 0x65, that is, X^7 + X^6 + X^5 + X^2 + 1, as used in the Train Communication Network, IEC 60870-5[17].

How to configure the CRC using the HAL API. The CRC (cyclic redundancy check) calculation unit computes a 16-bit CRC code derived from a buffer of 8-bit data (bytes). Input and output data reversal features are enabled. The user-defined generating polynomial is manually set to 0x1021, that is, X^16 + X^12 + X^5 + 1 which is the CRC-CCITT generating polynomial.

How to configure the CRC using the HAL API. The CRC (cyclic redundancy check) calculation unit computes the CRC code of a given buffer of 32-bit data words, using a fixed generator polynomial (0x4C11DB7).

How to configure the CRC using the HAL API. The CRC (cyclic redundancy check) calculation unit computes the 8-bit CRC code for a given buffer of 32-bit data words, based on a user-defined generating polynomial.

How to use a DMA to transfer a word data buffer from Flash memory to embedded SRAM through the HAL API.