The ACMP Interrupt project is a simple demonstration program that uses the SDK software. Itcompares the selected analog input with ACMP internal DAC output continuously and toggle the LEDwhen the final comparison result changed. The purpose of this demo is to show how to use theACMP driver in SDK software by interrupt way. The ACMP can be configured based on defaultconfiguration returned by the API ACMP_GetDefaultConfig(). The default configuration is: highspeed is not enabled, invert output is not enabled, unfiltered output is not enabled, pin outis not enabled, offset level is level 0, hysteresis level is level 0.

The ACMP Interrupt project is a simple demonstration program that uses the SDK software. Itcompares the selected analog input with ACMP internal DAC output continuously and toggle the LEDwhen the final comparison result changed. The purpose of this demo is to show how to use theACMP driver in SDK software by interrupt way. The ACMP can be configured based on defaultconfiguration returned by the API ACMP_GetDefaultConfig(). The default configuration is: highspeed is not enabled, invert output is not enabled, unfiltered output is not enabled, pin outis not enabled, offset level is level 0, hysteresis level is level 0.

The ACMP Interrupt project is a simple demonstration program that uses the SDK software. Itcompares the selected analog input with ACMP internal DAC output continuously and toggle the LEDwhen the final comparison result changed. The purpose of this demo is to show how to use theACMP driver in SDK software by interrupt way. The ACMP can be configured based on defaultconfiguration returned by the API ACMP_GetDefaultConfig(). The default configuration is: highspeed is not enabled, invert output is not enabled, unfiltered output is not enabled, pin outis not enabled, offset level is level 0, hysteresis level is level 0.

The ACMP Interrupt project is a simple demonstration program that uses the SDK software. Itcompares the selected analog input with ACMP internal DAC output continuously and toggle the LEDwhen the final comparison result changed. The purpose of this demo is to show how to use theACMP driver in SDK software by interrupt way. The ACMP can be configured based on defaultconfiguration returned by the API ACMP_GetDefaultConfig(). The default configuration is: highspeed is not enabled, invert output is not enabled, unfiltered output is not enabled, pin outis not enabled, offset level is level 0, hysteresis level is level 0.

The ACMP Polling project is a simple demonstration program that uses the SDK software. It comparesthe selected analog input with ACMP internal DAC output continuously and toggle the LED when thefinal comparison result changed. The purpose of this demo is to show how to use the ACMP driverin SDK software by polling way. The ACMP can be configured based on default configuration returnedby the API ACMP_GetDefaultConfig(). The default configuration is: high speed is not enabled, invertoutput is not enabled, unfiltered output is not enabled, pin out is not enabled, offset level islevel 0, hysteresis level is level 0.

The ACMP Polling project is a simple demonstration program that uses the SDK software. It comparesthe selected analog input with ACMP internal DAC output continuously and toggle the LED when thefinal comparison result changed. The purpose of this demo is to show how to use the ACMP driverin SDK software by polling way. The ACMP can be configured based on default configuration returnedby the API ACMP_GetDefaultConfig(). The default configuration is: high speed is not enabled, invertoutput is not enabled, unfiltered output is not enabled, pin out is not enabled, offset level islevel 0, hysteresis level is level 0.

The ACMP Polling project is a simple demonstration program that uses the SDK software. It comparesthe selected analog input with ACMP internal DAC output continuously and toggle the LED when thefinal comparison result changed. The purpose of this demo is to show how to use the ACMP driverin SDK software by polling way. The ACMP can be configured based on default configuration returnedby the API ACMP_GetDefaultConfig(). The default configuration is: high speed is not enabled, invertoutput is not enabled, unfiltered output is not enabled, pin out is not enabled, offset level islevel 0, hysteresis level is level 0.

The ACMP Polling project is a simple demonstration program that uses the SDK software. It comparesthe selected analog input with ACMP internal DAC output continuously and toggle the LED when thefinal comparison result changed. The purpose of this demo is to show how to use the ACMP driverin SDK software by polling way. The ACMP can be configured based on default configuration returnedby the API ACMP_GetDefaultConfig(). The default configuration is: high speed is not enabled, invertoutput is not enabled, unfiltered output is not enabled, pin out is not enabled, offset level islevel 0, hysteresis level is level 0.

The adc_etc_software_trigger_conv example shows how to use the ADC_ETC to generate a ADC trigger by PIT channel0 trigger.Every 1 second, PIT channel0 would send a trigger signal to ADC_ETC, which can arbitrate and manage multiple external triggers,and ADC_ETC would generate ADC trigger.In this example, the ADC is configured with hardware trigger. Once ADC gets the trigger from the ADC_ETC, the conversion goes,then the ADC_ETC ISR would be executed.

The adc_etc_software_trigger_conv example shows how to use the ADC_ETC to generate a ADC trigger by PIT channel0 trigger.Every 1 second, PIT channel0 would send a trigger signal to ADC_ETC, which can arbitrate and manage multiple external triggers,and ADC_ETC would generate ADC trigger.In this example, the ADC is configured with hardware trigger. Once ADC gets the trigger from the ADC_ETC, the conversion goes,then the ADC_ETC ISR would be executed.