The ACMP interrupt project is a simple demonstration program that uses the SDK software. It comparesthe selected analog input with ACMP internal DAC output continuously and print information corresponding to different comparison result in terminal. The purpose of this demo is to show how to use the ACMP driver in SDK software by interrupt way. The ACMP can be configured based on default configuration returnedby the API ACMP_GetDefaultConfig(). The default configuration is: high speed is not enabled, invertoutput is not enabled, unfiltered output is not enabled, pin out is not enabled, offset level islevel 0, hysteresis level is level 0.

The ACMP interrupt project is a simple demonstration program that uses the SDK software. It comparesthe selected analog input with ACMP internal DAC output continuously and print information corresponding to different comparison result in terminal. The purpose of this demo is to show how to use the ACMP driver in SDK software by interrupt way. The ACMP can be configured based on default configuration returnedby the API ACMP_GetDefaultConfig(). The default configuration is: high speed is not enabled, invertoutput is not enabled, unfiltered output is not enabled, pin out is not enabled, offset level islevel 0, hysteresis level is level 0.

The ACMP interrupt project is a simple demonstration program that uses the SDK software. It comparesthe selected analog input with ACMP internal DAC output continuously and print information corresponding to different comparison result in terminal. The purpose of this demo is to show how to use the ACMP driver in SDK software by interrupt way. The ACMP can be configured based on default configuration returnedby the API ACMP_GetDefaultConfig(). The default configuration is: high speed is not enabled, invertoutput is not enabled, unfiltered output is not enabled, pin out is not enabled, offset level islevel 0, hysteresis level is level 0.

The ACMP Polling project is a simple demonstration program that uses the SDK software. It comparesthe selected analog input with ACMP internal DAC output continuously and print information corresponding to different comparison result in terminal. The purpose of this demo is to show how to use the ACMP driver in SDK software by polling way. The ACMP can be configured based on default configuration returnedby the API ACMP_GetDefaultConfig(). The default configuration is: high speed is not enabled, invertoutput is not enabled, unfiltered output is not enabled, pin out is not enabled, offset level islevel 0, hysteresis level is level 0.

The ACMP Polling project is a simple demonstration program that uses the SDK software. It comparesthe selected analog input with ACMP internal DAC output continuously and print information corresponding to different comparison result in terminal. The purpose of this demo is to show how to use the ACMP driver in SDK software by polling way. The ACMP can be configured based on default configuration returnedby the API ACMP_GetDefaultConfig(). The default configuration is: high speed is not enabled, invertoutput is not enabled, unfiltered output is not enabled, pin out is not enabled, offset level islevel 0, hysteresis level is level 0.

The ACMP Polling project is a simple demonstration program that uses the SDK software. It comparesthe selected analog input with ACMP internal DAC output continuously and print information corresponding to different comparison result in terminal. The purpose of this demo is to show how to use the ACMP driver in SDK software by polling way. The ACMP can be configured based on default configuration returnedby the API ACMP_GetDefaultConfig(). The default configuration is: high speed is not enabled, invertoutput is not enabled, unfiltered output is not enabled, pin out is not enabled, offset level islevel 0, hysteresis level is level 0.

The ACMP Polling project is a simple demonstration program that uses the SDK software. It comparesthe selected analog input with ACMP internal DAC output continuously and print information corresponding to different comparison result in terminal. The purpose of this demo is to show how to use the ACMP driver in SDK software by polling way. The ACMP can be configured based on default configuration returnedby the API ACMP_GetDefaultConfig(). The default configuration is: high speed is not enabled, invertoutput is not enabled, unfiltered output is not enabled, pin out is not enabled, offset level islevel 0, hysteresis level is level 0.

The ACMP Round-Robin project is a simple demonstration program that uses the SDK software. User must set the round-robin mode trigger in specific board properly according to the board resource before running the example. When the example running, it sets positive port as fixed channel and internal DAC output as comparison reference in positive port and sets the channels input by useras round-robin checker channel. The example will enter stop mode and wait user to change the voltage of round-robin checker channel. It will exit stop mode after the voltage of round-robin checkerchannel changed by user.

The ACMP Round-Robin project is a simple demonstration program that uses the SDK software. User must set the round-robin mode trigger in specific board properly according to the board resource before running the example. When the example running, it sets positive port as fixed channel and internal DAC output as comparison reference in positive port and sets the channels input by useras round-robin checker channel. The example will enter stop mode and wait user to change the voltage of round-robin checker channel. It will exit stop mode after the voltage of round-robin checkerchannel changed by user.

The ACMP Round-Robin project is a simple demonstration program that uses the SDK software. User must set the round-robin mode trigger in specific board properly according to the board resource before running the example. When the example running, it sets positive port as fixed channel and internal DAC output as comparison reference in positive port and sets the channels input by useras round-robin checker channel. The example will enter stop mode and wait user to change the voltage of round-robin checker channel. It will exit stop mode after the voltage of round-robin checkerchannel changed by user.