Application Note 332
Using NXP i.MX RT1060 with Keil MDK
This hands-on tutorial introduces you to the NXP Cortex-M7 processor family using the Keil MDK toolkit and µVision IDE. The led_blinky example activating an LED may be downloaded from this web page using the APNT_332_V1.5.ZIP link below. It is compliant to Cortex Microcontroller Software Interface Standard (CMSIS 5.0). Debugging using Serial Wire Viewer data trace, Event Recorder and Power Measurement are shown in detail.
The NXP MIMXRT1060-EVK evaluation board, which includes an on-board, LPCLink2 CMSIS-DAP adapter for downloading and debugging, a USB A to microB cable, and an MDK installation are required. Optionally, a ULINK2, ULINK-ME, ULINKplus, ULINKpro or Segger J-Link debug adapter may be used. The ULINKpro and ULINKplus adapters provide the best performance and support Interrupt handling and timing display.
For more information regarding this tutorial, see APNT_332_V1.5.PDF.
Monday, July 27, 2020
Tuesday, July 21, 2020
of your data.