What's New in MDKARM Version 3.50

• [RealView Compilation Tools]
  MDK-ARM 3.50 comes with the RealView Compilation Tools build version 4.0.0.524 included in the folder ..\ARM\BIN40 and ..\ARM\RV31. For compatibility reasons the ..\ARM\RV31 folder now contains the RVCT libraries build version 4.0.0.524.
• [ULINK]
  Added a reset for the Serial-Wire-Connect state when a protocol error is detected.
• [Target Debugging]
  Added a driver for J-Link debugger which supports Cortex-M3 devices.
• [RTX Enhancements]
  RTX support for Toshiba board TMPA910 has been added in folder ..\ARM\ Boards\TMPA910\RTX_Blinky\.
• [RTX Enhancements]
  All RTX examples have been updated with the second generation kernel implementation RTX-V2.
• [RTX Enhancements]
  Support has been added for Luminary LM3S9Bxx devices. A preconfigured RTX_Blinky example for the Luminary EK-LM3S9Bxx evaluation board can be found in ..\ARM\Boards\Luminary\EK-LM3S9Bxx folder.
• [µVision]
  Scatter-loading functionality is now supported in evaluation.
• [µVision]
  Debugging support for Cortex-M0 based devices has been added.
• [µVision]
  Debugging support for Cortex-M1 based devices has been added.
• [µVision]
  Updated uVision Debug DLL for Luminary devices.
• [New Device Support]
  Analog Devices ADuC7034, ADuC7036, ADuC7037, ADuC7038, ADuC7039, ADuC7061, and ADuC7062.
• [New Device Support]
  ARM Cortex-M0 processor core.
• [New Device Support]
  Luminary Micro LM3S9B96, LM3S9B95, LM3S9B92, LM3S9B90, LM3S9792, LM3S9790, LM3S5B91, LM3S5791, LM3S2B93, and LM3S2793 devices.
• [New Device Support]
  NXP LPC2921, LPC2923, LPC2925, LPC2927, LPC2929, LPC2930, LPC2939, LPC1768, LPC1766, LPC1765, LPC1764, LPC1758, LPC1756, LPC1754, LPC1752, and LPC1751 devices.
• [New Device Support]
  Socle Technology Corp. PC7130 and PC7230 devices.
• [New Device Support]
  ST Microelectronics STM32F103T4, STM32F103C4, STM32F103R4, STM32F102CB, STM32F102C8, STM32F102RB, STM32F102R8, STM32F101T4, STM32F101C4, and STM32F101R4 devices.
• [Device Support]
  Updated: Headerfiles, startup code, and Flash programming algorithm for ADuC7034, ADuC7036, ADuC7037, ADuC7038, ADuC7039, ADuC7061, and ADuC7062 devices.
• [Device Support]
  Updated: flash programming algorithm for Atmel AT91SAM9xx devices.
• [Device Support]
  Updated: Flash programming algorithms for ST STM32 devices.
  • STM32F10x High-density Flash is used for 256/384/512kByte,
  • STM32F10x Med-density Flash is used for 32/64/128kByte, and
  • STM32F10x Low-density Flash is used for 16kByte flash devices.
• [Device Simulation]
  Added: device simulation and debug dialogs for Toshiba TMPM330FDFG, TMPM330FYFG, and TMPM330FWFG devices.
• [Device Simulation]
  Added: flash memory remapping feature for Atmel AT91SAM9260, AT91SAM9261, AT91SAM9263, AT91SAM9G20, AT91SAM9R64, AT91SAM9RL64, AT91SAM9XE128, AT91SAM9XE256, and AT91SAM9XE512 devices which allows applications to start from address 0x000000.
• [Device Simulation]
  Added: ADC triggers depending on Analog Comparators and PWMs, and nested interrupt controller NVIC which shows interrupts sources and priorities.
• [Device Simulation]
  Added: Repetitive Interrupt timer, and RS485 functionality for NXP LPC17xx devices.
• [Device Simulation]
  Added: power control simulation (PCONP)of SD/MMC, GPDMA, Ethernet, and USB peripherals for NXP LCP23xx and LPC24xx devices.
• [Board Support]
  Added: RTX-Blinky and Bootloader examples for Atmel AT91SAM9G20 board in folder ..\ARM\Boards\Atmel\AT91SAM9G20-EK\
• [Board Support]
  Updated: RTX-Blinky, LCD-Blinky, Blinky and Bootloader examples for Atmel AT91SAM9263-EK board in folder ..\ARM\Boards\Atmel\AT91SAM9263-EK\.
• [Board Support]
  Updated: RTX-Blinky, LCD-Blinky, Blinky and Bootloader examples for Atmel AT91SAM9RL-EK board in folder ..\ARM\Boards\Atmel\AT91SAM92RL-EK\.
• [Board Support]
  Updated: Blinky and Bootloader examples for Atmel AT91SAM9XE board in folder ..\ARM\Boards\Atmel\AT91SAM9XE\.
• [Board Support]
  Updated: Blinky and Bootloader examples for Atmel AT91SAM9260-EK board in folder ..\ARM\Boards\Atmel\AT91SAM9260-EK\.
• [Board Support]
  Updated: Startup code for Atmel AT91SAM9RL and AT91SAM9XE devices in folder ..\ARM\Startup\Atmel\.
• [Board Support]
  Added: CAN examples for Keil MCBSTM32 board with STM32F103VB device in folder ..\ARM\Boards\Keil\MCBSTM32\CAN.
• [Board Support]
  Modified: CAN examples for Keil MCBSTM32E board with STM32F103ZE device in folder ..\ARM\Boards\Keil\MCBSTM32E\CAN.
• [Board Support]
  Added : USB examples for Keil MCB2470 board with LPC2478 device in folders ..\ARM\Boards\Keil\MCB2470\USBHID, and ..\ARM\Boards\Keil\MCB2470\USBMEM.
• [Board Support]
  Added: USB examples for Keil MCB2140 board with LPC2148 device in folders ..\ARM\Boards\Keil\MCB2140\USBHID, ..\ARM\Boards\Keil\MCB2140\USBMEM, and ..\ARM\Boards\Keil\MCB2140\USBAudio.
• [Board Support]
  Added: USB examples for Keil MCB2300 board with LPC2368 device in folders ..\ARM\Boards\Keil\MCB2300\USBHID, ..\ARM\Boards\Keil\MCB2300\USBMEM, ..\ARM\Boards\Keil\MCB2300\USBAudio, and ..\ARM\Boards\Keil\MCB2300\USBCDC.
• [Board Support]
  Added: USB examples for Keil MCB2400 board with LPC2468 device in folders ..\ARM\Boards\Keil\MCB2400\USBHID, and ..\ARM\Boards\Keil\MCB2400\USBMEM.
• [Board Support]
  Added: RTX support for Toshiba TMPA910 board with TMPA910CRAXBG device in folder ..\ARM\Boards\Toshiba\TMPA910\RTX_Blinky.
• [Board Support]
  Added: Board support for Keil MCB1700 board with LPC1766 device in folder ..\ARM\Boards\Keil\MCB1700\.
• [Board Support]
  Corrected: initialization of timer1 for Keil MCBSTM32 ..\ARM\Boards\Keil\MCBSTM32\, and Keil MCBSTM32E board in folder ..\ARM\Boards\Keil\MCBSTM32E\ as well as for ST CQ-STMARM2 board in folder ..\ARM\Boards\ST\CQ-STARM2\, and ST EK-STM32F board in folder ..\ARM\Boads\ST\EK-STM32F\.