What's New in CARM Version 2.00

• [uVision3 IDE/Debugger/Simulator]
  Added device simulation and target debugging for the following devices:
  • Atmel AT91SAM7S128,
  • Atmel AT91SAM7S256,
  • Atmel AT91SAM7S32,
  • Atmel AT91SAM7S64.
  • Philips LPC2131,
  • Philips LPC2132,
  • Philips LPC2138.
• [uVision3 IDE/Debugger/Simulator]
  Added example projects for the Keil MCB2130 Evaluation Board to the \KEIL\ARM\...\Boards\Keil\MCB2130 folder .
• [uVision3 IDE/Debugger/Simulator]
  Added example projects for the Atmel AT91SAM7S Evaluation Board in the \KEIL\ARM\...\Boards\Atmel\AT91SAM7S folder.
• [ULINK USB-JTAG Adapter]
  Corrected a problem with Big Endian interpretation on Samsung devices. A configuration example may be found in the \KEIL\ARM\GNU\Boards\Samsung\S3C340X) folder.
• [ULINK USB-JTAG Adapter]
  Philips LPC213x and LPC210x devices are now stopped at RESET. This resolves issues with lock situations (for example IDLE mode) that disable JTAG.
• [CA ARM C Compiler]
  The Keil CA ARM Compiler is now released and is no longer in BETA.
• [CA ARM C Compiler]
  Added a PACK directive and a __packed attribute that allow definition of byte-aligned variables.
• [AA ARM Macro Assembler]
  Corrected a problem with the LDR PC,=Reset_Addr instruction. It should load the address, but not the content. Check your STARTUP.S files, since this instruction was part of the startup code in early versions.
• [LA ARM Linker]
  Added ELF/DWARF file output to *.ELF file.
• [uVision3 IDE/Debugger/Simulator]
  Enhanced the ELF/DWARF loader for include support for:
  • Full stack tracking,
  • Displaying enum types,
  • Using the lifetime information for register variables,
  • Debugging of source code in include files.
• [Advanced RTX for ARM]
  Added kernel-aware support for the Keil Advanced RTX Kernel to the Keil Development Suite for ARM.