What's New in ARARM Version 1.01

• [ARTX-ARM]
  Added example projects for the following target hardware:
  • Analog Devices ADuC702x Evaluation Board (\KEIL\ARM\BOARDS\ADI\ADUC702X\ARTX_BLINKY) For Analog Devices ADuC702x Devices
  • Atmel AT91SAM7S Microcontroller Board (\KEIL\ARM\BOARDS\ATMEL\AT91SAM7S\ARTX_BLINKY) For Atmel AT91SAM7S Devices
  • Hitex STR7 Evaluation Board (\KEIL\ARM\BOARDS\HITEX\STR7\ARTX_BLINKY) For STMicroelectronics STR71x Devices
  • Keil MCB2100/2130 Evaluation Board (\KEIL\ARM\ARTX\EXAMPLES\BLINKY) For Philips LPC21xx Devices
  • STMicroelectronics STR7 Evaluation Board (\KEIL\ARM\BOARDS\ST\STR7\ARTX_BLINKY) For STMicroelectronics STR71x Devices
• [Kernel]
  Added device-specific configuration files for the following devices:
  • Analog Devices ADuC702x (\KEIL\ARM\STARTUP\ADI\ARTX_CONF_ADUC702X.C)
  • Atmel AT91SAM7Sxx (\KEIL\ARM\STARTUP\ATMEL\ARTX_CONF_SAM7S.C)
  • Philips LPC21xx and LPC22xx (\KEIL\ARM\STARTUP\PHILIPS\ARTX_CONFIG.C)
  • STMicroelectronics STR71x (\KEIL\ARM\STARTUP\ST\ARTX_CONF_STR71X.C)
• [Kernel]
  Modified the ARM-Specific Software Interrupt Handler (in SWI_ARTX.S) to make it generic for all ARM devices. Some devices may require a NOP instruction to avoid Data Abort traps between stack switching.
• [Kernel]
  Enhanced the Stack Load display in the µVision Advanced RTX Dialog (available from the Peripherals Menu while debugging). Stack details are no updated from the current stack pointer value.