|
|||
| Products Download Events Support Videos | |||
Technical Support
On-Line Manuals
µVision4 User's Guide
About µVision
User Interface
Creating Applications
Utilities
Debugging
Debug Commands
Debug Functions
Simulation
Flash Programming
Dialogs
Example Programs
Hello: Your first Embedded Program
Measure: A Remote Measurement System
Open Project File
Compiling and Linking Measure
Program Execution
Testing Measure
View Program Code
View Memory Contents
Call Stack
Trace Recording
Breakpoints Dialog
Watch Variables
Source Browser
Command Line
Appendix
µVision4 User's Guide
Program Execution
Program execution can be controlled in several ways:
| Symbol | Description |
|---|---|
 |
Resets the CPU and removes all breakpoints. |
 |
Starts executing the program. |
 |
Open the Serial Window #x and enter the 'd' command for the MEASURE application. MEASURE shows the values from I/O Port2 and A/D input 0 – 3. The Serial Window shows the following output: |
 |
You can single-step through the program using the Step buttons in the Debug toolbar. The current instruction is marked with an yellow arrow in the code. The arrow moves each time you step. |
 |
Halt program execution with the Stop button or from the menu Debug - Start/Stop Debug Session. You may also press ESC in the Command Line of the Command Window. |
Use Debug Commands from within the window Command.
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Contact |
|
 |
|||
