µVision4 User's Guide

Setup Logic Analyzer

Current Logic Analyzer Signals

Lists the currently defined Logic Analyzer signals. Select a signal with the mouse to modify the attributes.

• Add a variable or VTREG for signal recording with New (Insert key).
• Remove the highlighted signal with Delete (Delete key).

Signal Display

Configures the appearance of a selected signal.

• Display Type sets the signal display mode to Analog, Bit, or State (signal transitions).
• Color sets the signal display color.
• Hexadecimal Display shows the signal values in HEX format. When disabled, decimal values are shown.

Display Range

Configures the displayed amplitude range of a signal for the Analog mode.

• Min Value sets the lower signal amplitude display range.
• Max Value sets the upper signal amplitude display range.

Display Formula (Signal & Mask) >> Shift

Displays specific bits of a signal.

• And Mask specifies an AND mask for displaying the signal value.
• Shift Right specifies a shift right factor for displaying the signal value.

Export / Import

Saves and loads signal definitions.

• Export Signal Definitions saves all currently defined signal configurations in a file.
• Import Signal Definitions imports from a file the previously saved signal definitions.

Kill All

Deletes all signals defined in the Logic Analyzer.

Close

Closes the dialog.

Note

• For additional information refer to Setup in Detail.