µVision4 User's Guide

Keil BL51 Locate

Use Memory Layout from Target Dialog

Enable this option to use the memory information specified under Project — Options — Target. You may still add additional segments to these settings.

Code Range

Specify the address range for segments placed in the CODE memory class (used for program code and constants). When Use Memory Layout form Target Dialog is enabled the address ranges are derived from the settings in the Target dialog.

Xdata Range

Specify the address range for segments placed in the XDATA memory class (used for variables specified with the xdata memory type). When Use Memory Layout form Target Dialog is enabled the address ranges are derived from the settings in the Target dialog.

Code

Locate CODE segments to absolute memory or specify a segment order.

Xdata

Locate XDATA segments to absolute memory or specify a segment order.

Pdata

Specify base address of the PDATA memory class. This setting must reflect the configuration of PDATASTART in the Startup Code.

Precede

Locate segments prior to other relocatable BIT, DATA, or IDATA segments.

Bit

Specify base address of the BIT memory class and locate BIT segments to absolute memory or specify a segment order. 

Data

Specify base address of the DATA memory class and locate DATA segments to absolute memory or specify a segment order. 

Idata

Specify base address of the IDATA memory class and locate IDATA segments to absolute memory or specify a segment order. 

Stack

Locates the stack segment named ?STACK in memory. By default the linker locates the stack on the last IDATA memory address used. Be careful when manually specifying an address, since it might result in run-time errors since data or idata variables are corrupt.

Linker control string

Displays the current directives at the linker command line.