Keil Logo

Technical Support

On-Line Manuals

µVision User's Guide

About µVision User Interface Creating Applications Debugging Start Debugging Start Energy Measurement without Debug Application Program Execution Debug Windows and Dialogs Breakpoints Window Call Stack and Locals Window Code Coverage Command Window Component Viewer Disassembly Window Editor Window Event Recorder Setup Event Recorder Event Recorder Window Events Filtering Event Statistics Window Post-mortem Analysis Event Viewer Execution Profiler Instruction Trace Window System Analyzer Usage tips Statistics Restrictions Logic Analyzer Setup Setup in Detail Restrictions Cortex-M Trace Configuration Memory Map Memory Window Performance Analyzer Registers Window Serial Window Debug (printf) Viewer Symbols Window System Viewer Adding System Viewer Windows System and Thread Viewer Thread States Toolbox Trace Data Window Trace Navigation Trace Exceptions Event Counters ULINKplus Window Watch Window Core Peripherals Cortex-M0 and Cortex-M0+ Nested Vector Interrupt Controller System Control and Configuration System Tick Timer Fault Reports (Cortex-M0+ only) Cortex-M3, Cortex-M4, and Cortex-M7 Nested Vector Interrupt Controller System Control and Configuration System Tick Timer Fault Reports Memory Protection Unit Cortex-M23 and Cortex-M33 Nested Vector Interrupt Controller System Control and Configuration System Tick Timer Fault Reports Memory Protection Unit Security Attribution Unit Debug Scripting Expressions Constants System Variables Peripheral Variables I/O Ports Serial Ports Program Variables (Symbols) Fully Qualified Symbols Non-Qualified Symbols Literal Symbols Using Symbols Line Numbers Bit Addresses Type Specifications Memory Attribution Specifiers Operators Differences between µVision and C Expression Examples Code and Data Trace (Cortex-M) Trace Features Configuring Trace Tracepoint Expressions Tracepoint Intrinsics Tracepoint Limitations Tracepoint Marks Tips and Tricks Review Peripherals and CPU Configuration Simulate I/O Ports Simulate Interrupts and Clock Inputs Simulate external I/O Devices Assign Serial I/O to a PC COM Port Check Illegal Memory Access Command Input from File Preset I/O Ports or Memory Contents Write Debug Output to a File Keyboard Shortcuts TPIU Initialization after RESET (Cortex-M) Prevent Opening Files Show Japanese Messages Debug Commands Debug Functions Simulation Flash Programming Dialogs Utilities Command Line Example Programs Appendix

Restrictions

When debugging on hardware, the number of items that can be defined in the System Analyzer is restricted by the microcontroller core (refer to Access Breakpoints in ULINK Debug Adapters). Many more different items can be defined in simulation mode.

The System Analyzer can record changes of:

  • Up to four global program variables, including struct members (requires SWO trace).
  • VTREGs that represent I/O pins of the microcontroller (only in simulation).
  • Peripheral registers that are triggered by external or internal events, but with the restrictions outlined below (only in simulation).

The System Analyzer cannot record changes of:

  • Automatic variables defined inside a function
    Automatic variables are located on the stack or in overlayable memory regions. It is not possible to record changes of dynamic memory locations.
  • CPU registers
    CPU registers cannot be triggered with read or write breakpoints. Therefore, such changes cannot be recorded.
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.