Keil Logo

Technical Support

On-Line Manuals

µVision User's Guide

About µVision User Interface Creating Applications Debugging Start Debugging Start Energy Measurement without Debug Application Program Execution Debug Windows and Dialogs Breakpoints Window Call Stack and Locals Window Code Coverage Command Window Component Viewer Disassembly Window Editor Window Event Recorder Setup Event Recorder Event Recorder Window Events Filtering Event Statistics Window Post-mortem Analysis Event Viewer Execution Profiler Instruction Trace Window System Analyzer Usage tips Save System Analyzer Contents Statistics Restrictions Logic Analyzer Setup Setup in Detail Restrictions Cortex-M Trace Configuration Memory Map Memory Window Performance Analyzer Registers Window Serial Window Debug (printf) Viewer Symbols Window System Viewer Adding System Viewer Windows System and Thread Viewer Thread States Toolbox Trace Data Window Trace Navigation Trace Exceptions Event Counters ULINKplus Window Watch Window Core Peripherals Cortex-M0 and Cortex-M0+ Nested Vector Interrupt Controller System Control and Configuration System Tick Timer Fault Reports (Cortex-M0+ only) Cortex-M3, Cortex-M4, and Cortex-M7 Nested Vector Interrupt Controller System Control and Configuration System Tick Timer Fault Reports Memory Protection Unit Cortex-M23 and Cortex-M33 Nested Vector Interrupt Controller System Control and Configuration System Tick Timer Fault Reports Memory Protection Unit Security Attribution Unit Debug Scripting Expressions Constants System Variables Peripheral Variables I/O Ports Serial Ports Program Variables (Symbols) Fully Qualified Symbols Non-Qualified Symbols Literal Symbols Using Symbols Line Numbers Bit Addresses Type Specifications Memory Attribution Specifiers Operators Differences between µVision and C Expression Examples Code and Data Trace (Cortex-M) Trace Features Configuring Trace Tracepoint Expressions Tracepoint Intrinsics Tracepoint Limitations Tracepoint Marks Tips and Tricks Review Peripherals and CPU Configuration Simulate I/O Ports Simulate Interrupts and Clock Inputs Simulate external I/O Devices Assign Serial I/O to a PC COM Port Check Illegal Memory Access Command Input from File Preset I/O Ports or Memory Contents Write Debug Output to a File Keyboard Shortcuts TPIU Initialization after RESET (Cortex-M) Prevent Opening Files Show Japanese Messages Debug Commands Debug Functions Simulation Flash Programming Dialogs Utilities Command Line Example Programs Appendix

Statistics

Statistical information on exceptions and events from an SCVD file can be displayed in the System Analyzer window.

Statistical event information

Context menu

Right-click Exceptions or Thread Events to reach the context menu.

Statistical event information

It gives you the following options:

  • Enable Statistics toggles the display of statistical information.
  • Select Statistics lets you select the source of the statistical information and the level of detail.
    • The source can be either All Data, which means all information that is available in the debug session or From Window which only takes the information from the currently visible window into account.
    • The level of detail depends on the context. For Exceptions, this can be only Active. In case of RTX5, this can be Inactive, Ready, Running (default), Blocked, or Not-running.
      If you have an event group in your software component, all <state> information will be selectable. A state marked as "ssel" will be used as default.

Note

  • Refer to SCVD format for more information about defining state information in an event group.
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.