SCOPE

The SCOPE command displays the address range of a module or function.

Syntax	Description
SCOPE	Displays the address range of all functions in the target program.
SCOPE \module	Displays the address ranges of all functions within the module.
SCOPE \module\function	Displays the address range of the specified program function.

Examples

>scope \measure\main                  /* show scope range of main()      */
MAIN RANGE: 0xFF01EF-0xFF03B6
>
>scope \measure                       /* show scope for module 'measure' */
MEASURE
  {CvtB} RANGE: 0xFF03B7-0xFF07E5     /* µVision4 dummy scope block      */
  {CvtB} RANGE: 0xFF000B-0xFF000D
  SAVE_CURRENT_MEASUREMENTS RANGE: 0xFF000E-0xFF0069
  TIMER0 RANGE: 0xFF006A-0xFF0135
  _READ_INDEX RANGE: 0xFF0136-0xFF01BF
  CLEAR_RECORDS RANGE: 0xFF01C0-0xFF01EE
  MAIN RANGE: 0xFF01EF-0xFF03B6
>
>scope                                /* show all scope ranges           */
MEASURE
  {CvtB} RANGE: 0xFF03B7-0xFF07E5
  {CvtB} RANGE: 0xFF000B-0xFF000D
  SAVE_CURRENT_MEASUREMENTS RANGE: 0xFF000E-0xFF0069
  TIMER0 RANGE: 0xFF006A-0xFF0135
  _READ_INDEX RANGE: 0xFF0136-0xFF01BF
  CLEAR_RECORDS RANGE: 0xFF01C0-0xFF01EE
  MAIN RANGE: 0xFF01EF-0xFF03B6
MCOMMAND
  {CvtB} RANGE: 0xFF09A6-0xFF0A23
  MEASURE_DISPLAY RANGE: 0xFF07E7-0xFF084A
  _SET_TIME RANGE: 0xFF084B-0xFF08CA
  _SET_INTERVAL RANGE: 0xFF08CB-0xFF09A5
GETLINE
  _GETLINE RANGE: 0xFF0A24-0xFF0A87
?C_FPADD
?C_FPMUL
?C_FPDIV
?C_FPCMP
...

Notes

Blocks identified with {CvtB} are created by µVision and are the result of insufficient debug information. This is normal for library modules and assembly language modules without debug information, and for blocks with a valid name but no scope range.