|
|||
| Products Download Events Support Videos | |||
Technical Support
On-Line Manuals
µVision4 User's Guide
About µVision
User Interface
Creating Applications
Utilities
Debugging
Debug Commands
ASM
ASSIGN
BreakAccess
BreakDisable
BreakEnable
BreakKill
BreakList
BreakSet
COVERAGE
DEFINE
DIR
Display
Enter
EVALuate
EXIT
FUNC
Go
INCLUDE
KILL
LOAD
LOG
LogicAnalyze
MAP
MODE
Ostep
PerformanceAnalyze
Pstep
RESET
SAVE
SCOPE
SET
SIGNAL
SLOG
Tstep
Unassemble
WatchSet
WatchKill
TraceAccessPoint
TraceDataPoint
TraceDisable
TraceEnable
TraceHalt
TraceKill
TraceList
TraceRun (ETM)
TraceSuspend (ETM)
ITMLOG
IRLOG
Debug Functions
Simulation
Flash Programming
Dialogs
Example Programs
Command Line
Appendix
MODE
The MODE command changes the settings of the PC's COM ports.
| Syntax | Description |
|---|---|
| MODE COMx baudrate, parity, databits, stopbits | Changes the settings of COMx port. The baudrate parameter must specify a valid baud rate like 1200, 2400, 9600, or 19200. The values for parity can be: 0 for none, 1 for odd, or 2 for even. The databits parameter cna be set to 8 for 8 databits, or 7 for 7 databits. The stopbits parameter can be set to 1 for 1 stop bit, 15 for 1½ stop bits, or 2 for 2 stop bits. |
Use the MODE command and the ASSIGN command to set the parameters for the serial input and output channels of the simulated CPU.
Examples
>MODE COM2 19200, 0, 8, 1 /* Setup COM2 for 19,200 bps, */
/* no parity, */
/* 1 stop bit */
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Contact |
|
 |
|||
