 µVision® User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
µVision® User's Guide
µVision3 Overview User Interface Creating Applications Utilities Debugging Debug Commands Debug Functions Simulation Digital Input
Push Button Interrupt Signal Impulse Patterns Analog Input Square Wave Signal Saw Tooth Signal Sine Wave Noise Signal Signal Combination UART Communication CAN Communication Dialog Pages Virtual Simulation Registers (VTREG) Simulate Incoming Messages Process Outgoing Messages Send Periodic Messages I²C Simulation I²C Concepts I²C Simulation Virtual Simulation Registers (VTREG) Simulating an I²C Device Application Examples SPI Simulation Flash Programming Dialogs Example Programs Command Line AppendixPush Button
The following Signal Function may be used to toggle an I/O pin similar to a connected switch.
//
// Toggle I/O Pin
//
signal void Toggle_IO_Pin (unsigned char digit) {
PORT2 = (PORT2 ^ 0x01);
}
You may define a Toolbox button that allows to access this function quickly with the following DEFINE command.
DEFINE BUTTON "Toggle P2.0", "Toggle_IO_Pin"
| Contact Site Map Press Privacy | Copyright © 2009 Keil™, An ARM® Company. All rights reserved. |
