| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
ULINKpro User's Guide
Introduction Hardware Description Setup ULINKpro Using ULINKpro 
Configure Cortex-M Devices for Tracing Atmel AT91SAM3 Devices 
Enable Serial Wire Trace Cortex-M0 BBB Devices Enable BBB Trace Luminary LM3Sx Devices Enable Serial Wire Trace NXP LPC17xx Devices 
Enable 4-Pin Trace (ETM) Enable Serial Wire Trace STMicroelectronics STM32F10xxx Devices Enable 4-Pin Trace (ETM) Enable Serial Wire Trace Toshiba TMPM330 Devices Enable 4-Pin Trace (ETM) Enable Serial Wire Trace 
µVision Windows Troubleshooting AppendixConfigure Cortex-M Devices for Tracing
The examples below explain how to configure µVision, ULINKpro, and the target system for tracing:
- Atmel AT91SAM3 Devices
- Cortex-M0 BBB Devices
- Luminary LM3S Devices
- NXP LPC17xx Devices
- STMicroelectronics STM32F10xxx Devices
- Toshiba TMPM330 Devices
Note
- To control the trace output, refer to Trace Configuration.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
