|
|||
| Products Download Events Support Videos | |||
Technical Support
On-Line Manuals
ULINK-ME User's Guide
Introduction
Hardware Description
Setting Up and Using ULINK-ME
Evaluation Boards
Analog Devices
Analog Devices ADuC702x
Analog Devices ADuC712x
Ashling
Ashling LPC2100
Atmel
Atmel EB40A
Freescale
Freescale MAC7100
Keil
Keil MCB2100
Keil MCB2103
Keil MCB2130
Keil MCB2140
Keil MCB2300
Keil MCBSTM32
Keil MCBSTR7
Keil MCBSTR730
Keil MCBSTR750
Keil MCBSTR9
Luminary
Luminary Stellaris Boards
Nohau
Nohau LPC3000
OKI
OKI ML674000
OKI ML67Q4003
OKI ML67Q4051
OKI ML67Q4061
OKI ML67Q5003
OKI ML69Q6203
Phytec
Phytec AT91M55800A
Phytec LPC229x
Phytec LPC3180
Sharp
Sharp LH75401
TI
TI TMS470R1A256
TI TMS470R1B1M
TQ Systems
TQ Systems TQMX16xU
ULINK-ME User's Guide
OKI ML67Q4003
The OKI ML67Q4003 Evaluation Board works with the ULINK-ME USB-JTAG Adapter. The following instructions show you how to connect and run an example program on this board.
To download and run an example project using ULINK-ME with the OKI ML67Q4003 Board:
- Connect the ULINK-ME Adapter to the JTAG connector on the OKI ML67Q4003 evaluation board.
- Connect the power adapter to the board.
- Start µVision.
- Select the BLINKY.UV2 example project from C:\KEIL\ARM\BOARDS\OKI\ML67Q4003\BLINKY\.
-
Click the Download
button to download the program to the target board.
-
Click the Debug button to start the
debugger.
-
Click the Run
button to start the program running on the target board.
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Buy |
|
 |
|||
