|
|||
| Products Download Events Support Videos | |||
Technical Support
On-Line Manuals
ULINK2 User's Guide
Introduction
Hardware Description
Setup ULINK2
Connecting ULINK2
Installing Drivers
Configure µVision for Debugging
ARM Devices
Debug Driver Configuration
ULINK USB-JTAG Adapter
JTAG Device Chain
Debug
Cortex-M Debugging
Debug Driver Configuration
ULINK USB-JTAG/SW Adapter
SW Device
JTAG Device Chain
Debug
Trace Configuration
Trace Port
Timestamps
PC Sampling
Trace Events
ITM Stimulus Ports
Setup Flash Programming
Using ULINK2
Configure Cortex-M Devices for Tracing
µVision Windows
Real-Time Agent
Troubleshooting Guide
Appendix
Installing Drivers
ULINK2 uses standard Windows USB drivers. It is configured as a Human Interface Device (HID) and is, therefore, directly supported by Windows operating systems. No additional or ULINK2-specific drivers are required.
To view the status of the ULINK2 USB connection:
- Connect the Keil ULINK2 Adapter to the PC.
- Right-click on My Computer and open the Properties dialog.
- Under Hardware click on Device Manager and select Human Interface Devices.
- Open the Properties page for each device. Under General — Location find the name Keil ULINK2, which indicates that the ULINK2 adapter is connected properly.
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Contact |
|
 |
|||
