| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
ULINK2 User's Guide
Introduction Hardware Description Setup ULINK2 Setup Flash Programming Using ULINK2 Configure Cortex-M Devices for Tracing µVision Windows Real-Time Agent 
Evaluation Boards Analog Devices 
Analog Devices ADuC702x Analog Devices ADuC712x Ashling Ashling LPC2100 Atmel Atmel EB40A Freescale Freescale MAC7100 Infineon Infineon XC16x Starter Kits Infineon Easy UTAH Keil Keil MCBXC167 Keil MCB2100 Keil MCB2103 Keil MCB2130 Keil MCB2140 Keil MCB2300 Keil MCBSTM32 Keil MCBSTR7 Keil MCBSTR730 Keil MCBSTR750 Keil MCBSTR9 Luminary Luminary Stellaris Boards Nohau Nohau LPC3000 OKI OKI ML674000 OKI ML67Q4003 OKI ML67Q4051 OKI ML67Q4061 OKI ML67Q5003 OKI ML69Q6203 Phytec Phytec AT91M55800A Phytec LPC229x Phytec LPC3180 Phytec XC16x Boards Revely Revely RMS100 Samsung Samsung S3C44001 Sharp Sharp LH75401 STMicroelectronics STMicroelectronics DK3300 TI TI TMS470R1A256 TI TMS470R1B1M TQ Systems TQ Systems TQMX16xU AppendixLuminary Stellaris Boards
The Luminary Stellaris Evaluation Boards work with the ULINK2 USB-JTAG Adapter. The following instructions show you how to connect and run an example program on this board.
ULINK2 Adapter Connected to the Stellaris Board
To download and run an example project:
- Connect the 20-pin ribbon connector from the ULINK2 Adapter to the JTAG connector on the Luminary Stellaris evaluation board.
- Connect the power adapter included with the kit to the board at J1.
- Start µVision.
- Select the DEMO.UV2 example project from C:\KEIL\ARM\BOARDS\LUMINARY\STELLARIS\DEMO\.
Click the Download button to download the program to the target board.
Click the Debug button to start the debugger.
Click the Run button to start the program running on the target board.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
